I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
I had slightly modified a TWI example (using nrf_drv_twi) to work with one of my sensors; It's basically the same with a different function called to handle the received data...
I'm trying to test the throughput improvement of the S130 alpha softdevice vs S130 V1.
I notice a couple of changes in the API that I'm not sure how to handle:
First...
I've been using the ble_app_uart example with S130 on a nRF51 DK board. I wanted to add an interrupt with some GPIO pins. So I added GPIOTE interrupt handler but the compiler...
Hi all,
I want to ask you if it is possible to program nRF51822 chips (Cortex-M0) with J-Link OB assembled on nRF52 preview DK (Cortex-M4F).
I have some older boards with...
Hello,
I am working on pin interrupts and was able to handle with 1 pin interrupt. I used GPIOTE port interrupt. This is the code snippet for initialising:
NRF_GPIO...
I am trying to get my system with a hardware RTC generating periodic interrupts every 30 seconds to sleep between interrupts. I'll paste the code below, but here is the problem...
Hi,
I had an issue which the other BLE tools can connect to my BT121 module, but NCF Master Control Panel keeps looping at the connection content page. FYI, it is bonded...
As the picture shows! I have changed some Option of target and some forbidden sign appears.
I guass it means the file is not available,if so, how can I delete it. Why It...
I use bootloader example of SDK8.1.0, when I begin OTA, I got GATT error.
I use nRF Toolbox Version1.16.2
here is application upload:
dfu_test_app_hrm.bin
here...
Hi
We are using the SDK files in our hardware projects and in our simulation environments to verify the functionality of our platform. While doing tests with the new SDK...
Hi All：
I'm working on ios ble midi proj. I have modified ble_nus code for my proj, I was modified the correct service uuid ,characteristic uuid , connection_interval ,latency...
Hello
I have recently downloaded SDK v10 for nRF51822 development using Keil uVision 5.14 IDE.
I am wishing to combine SPI slave function with custom BLE services/characteristics...
We are trying to find a way to send the High Frequency Clock directly out to a gpio pin. The reference manuals don't seem to have anything obvious.
Is there a way to do...
Hi,
I am trying to use PStorage to save simply 40 bytes of data onto a flash drive but for some reason the PStorage handler never gets called when I try to store and clear...
