I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
We have a product created with the BMD350 from Ublox (formerly Rigado). It is based on the nRF52832. it uses SDK 12 and implements the Legacy DFU. Updating to a newer SDK...
We're working on a project that makes use of an nRF9151 and an nRF7000 for wifi scanning (specifically for location services). We are currently debating the usage of passive...
i have a trivially simple "bare-metal" (register-level) test case in which i setup GRTC as follows:
MODE.SYSCOUNTEREN = 1 TASKS.START = 1 TIMEOUT = 2
i also have the LFXTAL...
On a nrf5340/nrf7002 custom board, using NCS 2.9.0, I am trying to get a reliable https connection to different backend servers.
I'm having trouble with the TLS handshake...
I recently flashed a new application onto devices that has prevented any new application images from being swapped into the primary slot. Any new images are uploaded to the...
Hello,
I got the https://github.com/nrfconnect/sdk-edge-ai/tree/main/applications/ww_kws application running on the nRF54LM20 DK with the Axon NPU and it can correctly detect...
I found that CoAP requests unexpectedly block GPS positioning. So, the solution is to add a synchronization semaphore between them. I stopped the CoAP request while waiting...
Hi Team,
I am planning to implement a secure boot mechanism on the nRF5340 for one of our products and would like to ensure the design is robust, scalable, and production...
Hi
I am using nRF54L15DK, with SDK v3.2.2.
I want to implement an event log, persistent in Flash.
Initially I thought of using FCB, but I am running in to issues with...
Hi
I have custom nrf5340 based product, with an NFC interface for card emulation. I have managed to get this to work in raw APDU mode in NCS 2.9.0 (with selected cherry...
Symptoms
A GPIOTE event channel is configured to detect a rising edge on a GPIO input. Via PPI, the event drives a GPIO output low within a few hundred nanoseconds. The...
Hello all, I am following up on a related issue regarding mcuboots partitioning and image validation. ( link to previous MCUBoot QA forum ). I have devices out in the field...
NPM1100 outputs VOUTB (2.1V) to power the NRF52832. Programming is performed via J-Link with an external 3.3V power supply. However, this causes a short circuit between VSYS...
