I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hello,
I am testing my NRF52 custom board with the Bluetooth Low Energy utility inside nRF Connect.
I am based on Windows and I use an NRF52DEVKIT as BLE dongle.
Is...
Hi all,
I'm having some trouble on figuring out how the UICR behaves and what I can expect from it. I am trying to lock the UICR from further modication. Based on the documentation...
Hi All,
I was trying to program a simple LED peripheral hex file to the nRF52840 dongle.
Initially I was modifying an existing sample program from one of the examples...
I am on Ubuntu 20.04 with SES 5.42c, SDK 16, and SoftDevice S140 version 7.0.1 I am using a Knowles SPH0645LM4H. I have put together a beacon that operates the microphone...
Hi,
We use TLS encryption with MQTT towards Amazons MQTT-service.
What we have been able to do, is send 1 packet (2KB max size, due to modem buffer limit set by Nordic...
Hi
I'm currently trying to use a cheap stlinkv2 clone flashed with https://github.com/x893/CMSIS-DAP for at test setup. (cmsis-dap enables it to remove APPROTECT/read back...
Hi,I need Tune-Up Information for all chanels and frequency ranges( "source based time average conducted power") incl. production tolerances for Nordic NRF 24AP2 IC.to be...
Hi..... I'm working with custom service and characteristic!!! I succeeded in changing the characteristic length like bellow. attr_char_value.init_len = 10; attr_char_value...
Hi,
I am trying to do some tasks based on a particular button press, below attached is the buttons_init() function and the button_evt_handler() function. Code compiles and...
For the nRF52805 how is throughput specified?
Throughput Spec:
"It is capable of Bluetooth high-throughput 2 Mbps" ( ref )
Is this spec for serial throughput...
Hi,
I'm trying to periodically send sensor data to the AWS server and followed the documentation here to connect and send data to the server. I use these configurations...
Hi!
I've been trying out a tutorial about adding custom service and characteristics ( https://devzone.nordicsemi.com/nordic/short-range-guides/b/bluetooth-low-energy/posts...
Hello ,
I am having nrf52832 custom board.
In my project i need to use both CLOCK source ( Low frequency clock and High frequency clock source ).
Timer running on high...
Hello, Second time in here, thank you so much for all the support so far!
I'm developing a Beacon BLE, I wanna be able to send data over Advertising or Scan response. So...
I am trying to implement ble_app_interactive on nrf52840 as my application will require 2 uarts. I have started from the example application for the nrf58832 and created a...
