My sensor is off-standard,so I have to use gpio to read and write my sensor.
Gpio IIC will take about 0.5ms to get data.
My app need send data every 7.5ms,it seems that...
Hi,
My android Proximity application fails on service discovery only for the very first time it connects with the devices(nrf51822 evaluation kit with sdk 5.2.0). Actually...
Has anyone converted the app note AN34 DTM Python script to C# or C/C++ ?
The Python DTM script is works OK with the setup specified in the app note AN34 figure 2, which...
Hi,
I have a serious problem, when I use uart of NRF51822 QFAAC0 to receive data from another MCU, I found that it will lost one bit at same position everytime. my SDK is...
Hi,
I just started to interface the lcd display with nrf51822 evaluation board. The display i'm using is, spi compatible, 18" tft (160x130) from tiny lcd. I took spi master...
Hi,
We are using the nRF905 device in an application where it needs to switch between auto-retransmitting and sending single packets, due to it communicating with several...
I have tried the following to no avail.
Tried 2 different laptops of Windows 11 with 2 different USB cables.
Tried ext power supply at 3 volts with SW10 set on.
Set...
HI
I am currently using NRF54L15 with SDK version 3.0.0, and I want to implement GRTC auto-reload without using interrupts. My main goal is to reduce CPU usage and utilize...
When programming my NRF52832 target card with VScode, if I don't use debug play, the code doesn't execute. What could be the reason? I don't have this problem in Segger Studio...
Hello:
I was using VS Code normally. Suddenly, I opened a folder and received the screen below when selecting nRF Connect. Note that no information appears. Line 7 of the...
Hi,
Today I have received nRF54L15 DK from Digikey UK and planning to connect a low power VGA camera for a mobile application over BLE. Do you have any recommendations...
I am currently debugging the nrf52832 project developed using the nrf5SDK.
I will encounter SOFTDEVICE: ASSERTION FAILED from time to time, like this:
I don't have a...
Hello,
I know this is a documented error but I'm still struggling to fully understand and fix this.
Context:
I'm trying to make my custom display driver working again...
Hi~
I'm using an nRF52 DK connected to the nRF54L05 with jumper wires for the flashing operation. I've confirmed that the DK works correctly, as it can successfully program...
hi support team,
customer is preparing to use 21540, only use gpio mode, not using spi interface,
may i ask how to deal with spi pins of 21540, float or pull up to vdd...
Hi,
I'm having trouble with the Matter Test Harness randomly failing tests and failing to commission my device. I have tried this with both my own Matter device and the...
Hello Team,
We are using custom nRF52833 with nRF21540 (PCB). we manually controlling the nRF21540 FEM using GPIO and SPI (not using the FEM driver) for testing purpose...
Hello
On my application I have noticed that when I use hardware flow control of the uart1 (not the console uart) the processor will get stuck just before the application...
I want to use a hardware encoder to implement a mouse scroll wheel. Do you provide a QEDC routine for me to quickly learn and use? Are there any specific pin requirements...
I've had problems during installation probably due to firewall/proxy/network protection, so I managed to install from command line as specified in Installing the nRF Connect...
