Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
I want to use the UART20 serial port to map to other pins for easier PCB layout, but when I use the NRF54L15，
overlay config
my main code but no printk or printf What...
Hi,
I’m using the nRF52840 for BLE packet capturing, including security-related exchanges. However, during analysis in Wireshark , I’m unable to see any SMP (Security Manager...
Hi There,
I have integrated ble_app_hrs and saadc module on nrf52840 dev kit, it compiled without errors. while debugging it is stuck in - saadc_sampling_event_init(), ...
I don't see how we can send 'conn param update request' rejection. I am getting BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST and there is way to update the conn params using sd_ble_gap_conn_param_update...
I am using a Bluetooth peripheral_uart routine with the nRF Connect SDK V3.1.0. During a compilation, the program encountered a large number of errors where nRF-specific terms...
Hi,
I am trying to implement FOTA download in SDK3.1.0 with an nrf9160 board. I had this working on an older SDK (1.6.1) so I know it's possible to save the progress and...
Hi,
I'm looking to use the nPM1300 with a fixed 5V DC input (no USB). I still want to use the rest of the nPM1300 features together with an MCU, including lithium battery...
Hi,
We have integrated the Onomondo SoftSIMs in our devices (custom PCB). The integration is looking good. We can provision it, works in multiple countries etc.
However...
I am trying to understand the process of certificate generation for the onboarding process of my devices. Especially with the future of "mass production" in mind. I understand...
I have a nRF9160DK board that was working. I am trying to flash zephyr/samples/hci_uart into the nrf52840 and zephyr/samples/central_uart into the nrf9160. I was able to build...
My project uses the rotary encoder having pin A, B and Common with nrf52832. I connected them to pin 9 and 10 and GND.
I modified Qdec example to but it does not print the...
In my system I am writing log messages to flas, in order to conserve space, I use the LOG_DICTIONARY_SUPPORT. when I read my log messages from flash, the timestamp is decoded...
Using NCS 2.9.0, Zephyr 3.7.99 on a custom nrf5340 board, I want to have multiple functions enabled on the USB interface : zephyr supplied MassStorage (msc), virtual UART...
Hi,
To test the BLE connectivity using the nRF54L15, is there any BLE test framework or python scripts for linux like Raspberry Pi, where Linux SBC acts like a host and...
Hi,
In order to solve another ticket, I need to make mass storage sample to work with a nrf7002dk and nc3.0.2 but I can't manage to make it work. It was working two years...
