Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hi,
I need some details about the button configuration
To perform a Single Button configuration like
One click (BUTTON_RELEASE)
Double Click (BUTTON_RELEASE)
Button...
Hello.
I'm playing around with GPIOTE example. I have all the include paths correct and the project can build fine. But I'm having error in the line
The error is at...
Hello there,
I would like to have my device serial number be set over uart and stored persistently via the nrf52840's SRAM in a ROM fashion. Is this possible? If so, where...
Hi,
we bought a few 3rd party modules ( https://www.raytac.com/product/ins.php?index_id=95 ) with nRF52833 on it. Just with lipo battery on VDDH Pin, VDD has an voltage...
Hi,
I am running this example from SDK 15.2.0.
In my serial port prints the timestamp wraps at 1 second:
What should I do in order to see correct timestamps?
Hi,
I'm using the the pc-ble-driver together with the nrf-ble-driver-4.1.1-win_x86_32 library and two nRF52840 dongles on two different COM ports.I'd like to clarify on...
Hi,
Please help to explain the “onboarding” process of nRF9160 SIP (via its IMEI) used in our product . — For example in production we buy 500 nRF9160 SIP’s from Nordic...
I am trying to use the ble_eddystone_app on a nrf52840 dongle. The way this app appears to work is so: 1. device starts in advertising but not connectable mode
2. pressing...
Hi team,
I am using SDK V16.0.0 and looking at the flash_fstorage_s140 example. There are wait_for_flash_ready function calls after the nrf_fstorage_write function calls...
Does the nRF52 ( or anyother product ) support ASHA and MFI audio streaming?
It looks like ASHA is supported, I found this:
https://github.com/nordic-auko/nRF52-ble-audio...
Hello,
We're bringing up custom hardware using SiT1532 MEMS 32kHz oscillator. This part outputs a low swing single ended clock source (300mV +/-55mV p-p). I'm struggling...
So we are creating a peripheral with a characteristic meant to keep the central synced with the state of our peripheral. The peripheral is running all the time, could be ON...
1. This is on the stock LPN example, with one change to debug-print `status_code` inside handle_appkey_add().
Here is the diff:
2. To reproduce:
- flash and provision...
Hello,
I am currently working on a product with nRF51822 chip, based on SDK10.0.0. The problem is, after a firmware update, my device fails to reconnect to an Android mobile...
Hi,
I've launched wireshark + nRF52 Dongle successfully and I'm also able to select my device (named EWAT AI-No) from the list to sniff. However there's something I don...
