Hi: The device shows successful reconnection, but the mobile end is not connected.
And the connection information displayed on the device is (public), which is actually...
I am trying to measure the 300mA system current.
I cut off the system lane and connected Vin, Vout.
And when in ampere mode, the system is not turning ON.
(When I replaced...
Hi Nordic,
I have a custom board using a Raytac MDBT53 module with nRF5340. The board is designed for 3.3 V / LDO mode, but during bring-up I likely flashed firmware/configuration...
Hello Nordic support,
I am using two nRF54L15 devices with NCS v3.0.1 and ESB DPL at 1 Mbps. Auto ACK is enabled, the payload is 252 bytes, and the retransmit count is 9...
# SoftDevice Controller assert during DTM receiver test at dead/marginal RF link (nRF52833) ## Summary On an nRF52833, running the nRF Connect SDK Direct Test Mode (DTM) 2...
A customer implemented a nRF52840 (QIAA package) and says the output power is about 10dB lower than expected. Having done multiple nRF52 designs with good results, I reviewed...
While configuring a scene, the blind device is not visible in the scene settings screen, so it is not possible to set or save the blind position as part of the scene.
Steps...
The overall goal and then the specifics of what's been tried: I'm trying to utilize as much of the left-over flash space as possible to store environmental data during periods...
Hello,
I started working on mesh networking and to initiate i am looking at lighting control example . I have one nrf52dk PCA10040 which can be used as client and two nrf51...
I am working through link this tutorial and I've been able to successfully complete the steps up to D3. I'm using the bootloader_secure_ble example from SDK13 on an nRF52840...
RTT Viewer has been working great.
But is there a way to make the window buffer bigger so that I can scroll back more history?
It only saves about 80 lines.
Thanks
Hello,
I'm working on nrF52832 with two different Android device : Samsung Galaxy note 3 neo and HTC ONE M8.
My test :
Central side ( smartphone ) : each 200 ms...
Hi!
Does Nordic have plans to include any API functionality for choosing an initial scan channel in sequence of jumping over 37, 38, 39 channels?
Currently (SoftDevice...
Hello Nordic,
I tried to debug my board using the JTAG port (P12) on the nRF6310 motherboard. But it's not possible to flash the chip in Keil. I got the error: "Error:...
I use nrf51 DK (PCA 10028) like hardware for sniffer.
I download sniffer software 1.0.1 and flash the dk with help of nRFgo Studio.
I start sniffer.exe and after unplug...
Hi, I'm developing an application for the nRF52832 using mbed and the S132 SoftDevice. Since it appears that the SoftDevice requires exclusive use of Timer0 and mbed uses...
Hi,
I am having 1 central and 2 peripherals. I use ble_app_hrs as the base for both. Sometimes, I dont get the BLE_DB_DISCOVERY_COMPLETE even after I get the BLE_GAP_EVT_CONNECTED...
Hi,
I had some erratic results when I hook these devices via SPI, using a level shifter (e.g. TXB0104) to protect the nRF52. When I look at the schematic for the nRF52...
How I can pairing via NFC with phone? I want that pairing was with a password. I used for exaple project "experimental_ble_nfc_pairing_reference". I used SDK 14 and SoftDevice...
Hi,
I've couple of Nordic Thingy 52.
I was able to connect to these using my Samsung A5 2017 running Marshmallow and see the various sensor readings.
After an OS update...
I am in the process of porting my code from SDK13.0 to 14.0 in order to use s332 v5.0
I can compile and run my application. While it's running, I can see that it is sending...
We are using this device and we seem to have an issue reading from P0.20.
I know this is a dual purpose pin. We have programmed it for input with pullup. We have it attached...
