Hi everyone,
I'm developing a BLE application where I measure throughput between an nRF5340DK acting as peripheral and an nRF52 Dongle as the central (using a Python script...
Hi Nordic Team,
Previously, with the nRF52840, we could use the internal ADC channel to directly measure the supply voltage (VCC) for battery monitoring without external...
Hello, we are developing a BLE application using nRf52833. Because of the waterproof & stainless steel casing requirement with rechargeable battery charging capability, we...
Hello,
I am working with the NRF5340dk, nrf7002ek, and PPKII. I am unable to get the DK to power up with the PPK. I used a knife to break the trace but for some reason...
Hi,
The attached code is based on a sample code from NCS v2.9.1 and creates a LittleFS flash disk on external SPI NOR onboard nrf54L15DK. There is a mismatch in the code...
Somehow a program I have running on a nrf52840-DK board will enable protection. This kind of screws up the small application I am testing because it seems to lock out the...
Hi,
I am trying to program the custom nRF9160 board using SEGGER JLink/SWD programmer , For same of the boards when connected to custom board and trying to select the device...
what's the difference between app_timer api an nrf_drv_timer
are they using separate timers or the same timers?
if they are using the same timers, can app_timer_create...
I'm trying to use app_timer without softdevice, I tried to initialise it explicitally but still not working
static void lfclk_config(void)
{
uint32_t err_code = nrf_drv_clock_init...
I have an application which uses SPI to communicate with ADC.
when I don't use SoftDevice and use nrf_drv_timer to start conversion periodically it works
but when I...
Hi,
I am using the sample ble_gls code from Nordic.
When i try to write to the RACP characteristic through an iOS code that we are developing it gives an error CCCD not...
Upgrade softdevice through OTA (old softdevice version is s110_7.0.0, new softdevice version is s110_7.3.0), when complete upgrading, the application can't work but only the...
Dear Nordic developers,
In my project there is a possibility that CPU and RADIO EasyDMA peripheral can access to the same memory RAM locations in parallel. I read from...
I try to run ble_app_hrs_c & ble_app_hrs with softdevice S132-v2, when ble_app_hrs_c receives DM_EVT_CONNECTION event, reset event occurs and restarts.
Any idea to resolve...
Has anyone got the setup described here: developer.nordicsemi.com/.../a00042.html
running using mbed instead of uvision?
If not, any direction or guidance on how to...
I use timeslot and BLE in my project.
m_slot_length = 5000; //us
m_timeslot_request.request_type = NRF_RADIO_REQ_TYPE_NORMAL;
m_timeslot_request.params.normal...
Hello,
I want to implement a single bank ble dfu bootloader for nrf51822_QFAC. I already read most of the threads regarding this topic here in the DevZone. But now I`m...
I am developing some application and I have decided to use Device Addresses to distinguish between devices. I have read device addresses of 2 chips (I have read addresses...
Hi,
I am working with Gazell device and host example code from the Keil pack installer, using the default the data rate of 2MBit, so per Nordic's documentation the timeslot...
I confused that I run a SDK 9.0.0 example ble_central_and_peripheral app_s130_demo on my nrf51 SDK. then use Android App MCP to scan Advertise data. it did not work.
but...
I'm faced with a curious problem.
The examples of nRF52 SDK 0.9.2 have linker sciprt like this:
/* Linker script to configure memory regions. */
SEARCH_DIR(.)
GROUP...
