I'm looking at interfacing a typical Wheatstone bridge sensor to the nRF51822 ADC. This particular sensor only requires a mA or two for excitation and the output fits within...
When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
Hi All,
I'm working with the NRF52 Preview DK, with SDK V 0.92.
I've been looking at and tweaking the SPI_Master tutorial found under /examples/peripheral/spi_master...
I'm exploring the possibility of using an nRF51 for a simple device which must take data samples on a fixed clock and push them to a remote client. The issue I'm investigating...
Even though the documentation suggests that there are 3 RTCs (RTC0, RTC1 and RTC2) and the file nrf52.h has a declaration for the RTC2 peripleral, I am not able to use it...
Hello,
I need a bigger bootloader so if i modify ld file line from
FLASH (rx) : ORIGIN = 0x7A000, LENGTH = 0x4000
to
FLASH (rx) : ORIGIN = 0x00077000, LENGTH = 0x8000...
link text from this post i am generating interrupt using button 3. when i push my button,interrupt generates,LED turn on. but after turning on LED, i want to clear interrupt...
I am using SDK 9 on an nRF51 device with the S110 SoftDevice. I am aware of issues using the the PWM library from SDK 9. I need to use the PWM functionality but would like...
Hi,
i tried to modify app_pwm to add an additional timer, since i'm out of timers.
so at the end of app_pwm_init i added
nrf_drv_timer_compare(p_instance->p_timer...
Does NFC has something like an unique adress?
Because the nfc examples in the sdk detect all nfc devices. But I would like to detect only predefined devices.
Or is there...
I seem to be getting correlation on addresses
I running the radio transmitter and receiver examples provided in the nRF5 v11 SDK. However, I am observing still some unexpected...
Hi when I try to run the HRM collector the scan start fails with error code 12289
I am using visual studio and C++
What am I missing? I downloaded "connectivity_115k2_with_s130_1...
Hey All -
My team is new to Bluetooth development and so this may be a naïve question. Pardon us for this, if so.
We are trying to create an Android App that would scan...
Hi,
There is a difference of one digit in BT address and DEVICEADDR. Could anybody explain this? I know in the last byte we have to add C0, but what about the frst byte?...
I added CCCD descriptor to Battery Level characteristic in the proximity_setup.xml.
The nRFSTudio throws an error 0x01 while generating services.h.
Kindly help me generate...
8.0, multilink example, peripheral, s110 softdevice.
I modified the button_event_handler() function in main.c into this:
static void button_event_handler(bsp_event_t...
