I am trying to measure the 300mA system current.
I cut off the system lane and connected Vin, Vout.
And when in ampere mode, the system is not turning ON.
(When I replaced...
Hi Nordic,
I have a custom board using a Raytac MDBT53 module with nRF5340. The board is designed for 3.3 V / LDO mode, but during bring-up I likely flashed firmware/configuration...
Hello Nordic support,
I am using two nRF54L15 devices with NCS v3.0.1 and ESB DPL at 1 Mbps. Auto ACK is enabled, the payload is 252 bytes, and the retransmit count is 9...
# SoftDevice Controller assert during DTM receiver test at dead/marginal RF link (nRF52833) ## Summary On an nRF52833, running the nRF Connect SDK Direct Test Mode (DTM) 2...
A customer implemented a nRF52840 (QIAA package) and says the output power is about 10dB lower than expected. Having done multiple nRF52 designs with good results, I reviewed...
While configuring a scene, the blind device is not visible in the scene settings screen, so it is not possible to set or save the blind position as part of the scene.
Steps...
Hello,
I am working on unidirectional voice broadcasting device where the maximum range is the priority. At this time I am developing on Audio DK boards.
I need some help...
I'm trying to send a parameter over BLE, but once i've stopped using the BLE stacked (and unininited softdevice) I can't seem to save the parameter recieved with pstorage...
I am trying to use mpu6050 with nrf52840, using bare metal programming. The program gets stuck at this loop -
while ( NRF_TWI0 -> EVENTS_TXDSENT == 0 ); what is the problem...
Hello
I've previously developped a BLE peripheral product with a nRF52840 chip. I've been able to do everything I wanted for my peripheral and while I was making it I...
How to determine if the download is complete when downloading files from the FTP server using the ftp_get function?
Although Ctrl_cb will return code, in my actual testing...
Hello everyone,
in one of my project i have to implement button functionalities. using single button, I have to put device into OFF mode and also wake up from OFF mode....
We're developing a custom nRF 9160 based device and our product requires that we also develop our own AWS cloud where we host our own domain, including databases, back-end...
Hello guys,
The size of my bluetooth packets that i want to receive is around 257-260 max.
Can i put CONFIG_BT_L2CAP_TX_MTU to 260 ? i don't want a large value for RAM...
Hello, I have a custom board based on the nrf5340 and I am attempting to get bluetooth working.
The problem lies in the bluetooth initialization step with bt_enable. When...
Hi,
I'm working on Power Profiler with PPK2, I was on version 4.1.1 updated it to 4.1.2 but then the tool Power Profiler was recognizing my PPK2 as PPK1.
Then dongrated...
Hi,
Like in the topic - I wonder, if using internal TEMP for monitoring temperature of environemnt is a good idea? I know it is not accurate nor preciese, but it will be...
Hello DevZone,
I'm developing nRF52840 BLE & ESP32 Wi-Fi coexistence with 3-Wire PTA. I followed this document: https://docs.nordicsemi.com/bundle/ncs-2.5.3/page/nrf/device_guides...
Hi guys,
We are building an IoT device on nRF9160
The main protocol is MQTT and we are using AWS IoT Core as a Cloud provider.
MQTT client is based on nRF Connect SDK...
