I am trying to measure the 300mA system current.
I cut off the system lane and connected Vin, Vout.
And when in ampere mode, the system is not turning ON.
(When I replaced...
Hi Nordic,
I have a custom board using a Raytac MDBT53 module with nRF5340. The board is designed for 3.3 V / LDO mode, but during bring-up I likely flashed firmware/configuration...
Hello Nordic support,
I am using two nRF54L15 devices with NCS v3.0.1 and ESB DPL at 1 Mbps. Auto ACK is enabled, the payload is 252 bytes, and the retransmit count is 9...
# SoftDevice Controller assert during DTM receiver test at dead/marginal RF link (nRF52833) ## Summary On an nRF52833, running the nRF Connect SDK Direct Test Mode (DTM) 2...
A customer implemented a nRF52840 (QIAA package) and says the output power is about 10dB lower than expected. Having done multiple nRF52 designs with good results, I reviewed...
While configuring a scene, the blind device is not visible in the scene settings screen, so it is not possible to set or save the blind position as part of the scene.
Steps...
I used NRF52832 before, nRF5_SDK_14 for the software, using the ble_app_hrs_rscs_relay example in the SDK, NRF52832 as the host to connect a heart rate wristband, and then...
Hi, hope you everything goes well.
I have a question about using the CT008-U LCD, with nrf52840. And I am going to use gfx class function to write text or draw a rectangle...
Hi, I have interfaced the nRF52832 with temperature sensor via i2c(MAX30205 temperature sensor) . I am advertising only when it become low temperature( setting the threshold...
Hi Devzone:
I want to make nRF52833 chip enter sleep mode but not deep sleep(SYSTEM OFF) so that real time clock can still wake up the system. We don't use softdevice. ...
Hey,
I have some weired problems on DFU process where the error just appears on nrfConnect PC version.
I'm experimenting with the DFU update. I have previously used SDK...
I have 20 Nordic Thingy 91 that I am using for a project to collect temperature, humidity, and air quality. I had them programmed so that they can log the info on google sheets...
Hi,
I have a couple of general questions regarding BLE packets, things that are not completely clear to me. I'm using SD S140 v6.1.0. I hope this doesn't end up in too many...
Hi there!
Me again... I'm having issues with networks that consist of more than two nodes. When my network consists of three nodes and one node sends a message to another...
Hello I'm using sdk v17 and trying to shorten PASSKEY.
Currently, my PASSKEY is 6 letters long. I want to shorten it to 4 letters, is this possible?
Or how do I get rid...
In my peripheral FW I set the Data Length to 251 and MTU to 247. I also set the Tx Max time to 16 (16 * 1.25msec), However I always see the during the connection handshaking...
Hi,
My requirement is to send a bulk of sensor data over BLE to view on the app, I have taken dummy 1000 samples and successfully transferred them by dividing it into chunks...
Hi everyone,
I'm programming nRF52833 for my application. In my application, I used ble_advdata_parse to read the advertising packet for filtering mine device. However,...
Hi,
I am trying to read and write data from flahs using the fds library. For the moment my main problem is that when calling fds_record_find, it returns FDS_ERR_NOT_INITIALIZED...
Hello,
is it planned to add support for PyOCD and/or OpenOCD for NRF9160?
If yes, when?
ATM (26.02.2020) they support only NRF51 / NRF52
https://github.com/zephyrproject...
