I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330.
I understand need to modify GPIO.
PCA20006 firmware consist of 3 firmware, SoftDevice, application...
I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
I'm faced with a special error: we are not able to install the nRF Connect V1.8.0 using the tools published by Nordic.
We use the latest version of the tool chain manager...
Hello,
I am trying code (and compile) in C++ with a NRF52832 on Keil UV5.
In the C/C++ options i don't see the compiler option for the preferred language when I open a...
software version :nrf connect SDK 1.6.1
hardware:nrf5340
ble stack:ble 5.0
ble central: iphone x app
ble client:nrf5340 kit
question:I was failure to set Tx len...
Hi, I followed the procedure described here with Nordic Thingy 91 https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/nowi-powered-energy-autonomous-nordic-thingy...
Hello,
I'm currently trying to enable static buffer for MBedTLS as described here: https://tls.mbed.org/kb/how-to/using-static-memory-instead-of-the-heap .
I wrote a simple...
Hi, guys. I'm using both nRF5 SDK v17.1.0 and the S112 SoftDevice v7.3.0 with the PCA10056 (Rev 2 nRF52840 board).
infocenter.nordicsemi.com/index.jsp
I used the sd_ble_gap_ppcp_set...
Hi,
1. In freerTOS, how to improve the printing priority of NRF_LOG_INFO
2. How do I avoid overwriting what I want to print
Thank you for all your assistance. Kind...
Hi,
1.How can I use this function?
2.Can you provide a simple example
3.I have the following information, but I still don't know how to use it.
https://developer...
Hi ,
1. How do I port the NCS V1.8.0 asset_tracker example to NCS V1.9.0
2. The customer code was developed in asset_tracker and failed to port to NCS V1.9.0
Thank you...
Hi,
I have a few thingy:91 devices (~10) and when using the IBasis SIM card, I'll randomly be connected to Telus, Bell, Rogers or Videotron. Some of them do not support...
Hi,
I have implemented BLE OTA DFU using SMP service (I integrated SMP sample ) on nRF25833. Version of NCS: 1.8.0.
I have tested it with nRF Connect mobile app and it...
I want to make a thread protocol based luminaire product, there will be 300+ luminaires and 10+ OTBRs, and then control them through the cloud platform. Now I need to verify...
Hi. I apologize in advance if this question is in the wrong place or is too elementary for this location/audience. I have prototyped a product using two Nano 33 BLE arduinos...
Hello, I developed for my customer, a ZigBee coordinator in last 2019, using nRF5 SDK for Thread and Zigbee v3.2.0. Now I'm debugging to add one new feature, but some time...
