I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi, for a project at my university I need to analyze BLE signales. In this context I need to demodulate a BLE signal AND extract the I/Q samples from the same signal. Does...
Hi, I have my nrf51 Dk (PCA10028) on which I want to connect a buzzer or speaker to one of the gpio pins which are not in use. I am confused on the following points:
1....
I'd like to know if it’s still true that the DFU bootloader (i.e with BLE transport) is strongly coupled to the SoftDevice version. In other words, if we do a SoftDevice over...
From page 520 of nRF52840 Product Specification 1.0 4413_417 v1.0 / 2018-03-16
If the watchdog is configured to generate an interrupt on the TIMEOUT event, the watchdog...
I am trying to flash all three images together. I have the firmware updating working, but if you flash them together, the bootloader doesn't know that the application is programmed...
Hi,
We are preparing the first "production" run and we are looking on alternatives for production programming and testing, so far our factory used nRFgo for the pre-series...
I need to have more than 30 servers (and 1 client) in a mesh, so I increased the SERVER_NODE_COUNT value. But this results in a static assert in config_server.c:
How to...
Hi,
I know that this issue is well documented in the forum, but I have read everything and tried all of the suggested fixes, but nothing worked.
I am trying to Enter systemOFF...
Hi,
I have tried to find out how to aks the current time and set it, without success.
time(NULL) returns invalid data. What methods I should use to get the current time...
I want to simply put signal (sine wave) from signal generator into analog input and use saadc. I have program which uses ain4 and ain5 pins. So I was just wondering how I...
Basically I have modified the ble_app_uart example to connect multiple centrals(android devices),
now i want to transfer the string to all android devices which are connected...
Hello,
Would like to know the performance(i.e, latency when network size increases with respect to payload) of Thread, Zigbee, BT mesh wireless protocols. Is there any documentation...
I have some questions that I hope some of you fine engineers can shed some light on. First, some story time is probably in order. Skyrocket Toys developed a line of IR tag...
Hello All,
I am working on nRF51822 custom board. For programming I am use IAR Embedded Workbanch IDE in windows 7. For reference i am use nRF SDK 8.1.0.
Write now i am...
