I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
Hi,
there is no migration guide available for 15.2 , my application currently uses 14.0.
1. when will the guide be available? can use the one for 15.0 till then? will...
I have followed this posting by Hung Bui , with light_switch_proxy_server being combined with the ble_uart.
I am using: nrf52 dk, Mesh SDKv2.0.1, nrf5_sdk_15.2.0.
By commenting...
Hi,
Errata 202 limits the use of vdd as a power source to external components and I, therefore, would like to use a GPIO instead.
My question: is there a need to use a...
Hi,
In my project I am using SDK 14.2 with S332.
I need to change the data in the manufacturer part of the advertisement packet once per second (nearly, timing is not...
Hi,
I have a strange issue. I am reading values from an accelerometer. The read values go into an array which is uint8 and 7 bytes long.
The values are read ok and they...
Hello everyone,
My usb connector is dead on my nrf51 dk, do you know if it is possible to program it without using the usb connector, maybe by using a USB serial port adapter...
Hi!
Does latest NRFUTIL 4.0.0 include mesh update option?
I saw in branch dfu_mesh on pc-nrfutil github that this branch was last updated on 16.12.2016 (nrfutil 0.3) and...
In my project LPN node need to communicate with more than one friend node.
Is it possible to make multiple friend establishments by single LPN node or is it something like...
Hi all,
I started a project on nRF52840 dongle with Segger IDE. I used SDK15.2 given by Nordic and my goal is to develop a program that permits to communicate between...
Hi,
Noted that nRF mesh app needs GATT bearer to provision a mesh device. I'm using 2 nRF52 DK boards, provisioning is fine, set the keys, subscription lists, etc, everything...
Hello, First of, I'm developing with eclipse an application based on the freertos example of the SDK 15.0 with softdevice S132 v6.0.0. My problem is that the nRF52 sometimes...
Hi. I have the latest topology monitor downloaded from the home page. It seems to have a problem. Every time i try to run it from my windows 10 machine (32 bit), it gives...
nRF TTM win32-x64 will not run on my PC. I use Windows 10 and am trying to run the executable but i keep getting "app cannot run on your PC. Contact the publisher....".
...
Hi. I managed to set up a mesh (Thread) using 9 nodes of the nRF52840 SoCs. I am currently using Putty to send commands and pings between the nodes. What i need now is a way...
