I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
Hello,
I´m trying to send a paket of databytes. For some reasons I need to send it byte by byte (that´s not changeable).
I have inited the uarte with a handler:
nrfx_uarte_init...
I am using the nPM PowerUp utility along with an nPM1300 development kit. The software provides options for configuring the soft-start current of the load switches. However...
Hi all,
I searched nRF54L PRELIMINARY DATASHEET v0.8 and found
9.1.1.2 DLPIDR: TINSTANCE field description reads " This value is set by the UICR.TINSTANCE register. "...
I'm using Bluetooth Mesh Sensor code, working on the nRF52833 DK. I want to add my own sensor, the ICM20948 IMU, to this function and send the sensor's readings to the Mesh...
Hi Support team,
My application was based on NCS v2.5.2, which has no driver for the charger bq24295, and I ported a driver from Linux and it worked well.
Now I want to...
Hello! I need to send a text message to my server via HTTP post; I found this application on the forum; nevertheless, I received multiple errors: "error: unknown type name...
I am trying to make a device based on Seeed XIAO BLE nRF52840, which should periodically transmit battery voltage via BLE. The BLE connection should be constant I wanted to...
Dear all,
Recently, I developed LE audio examples using nRF5340 following the instructions from nRF connect SDK 2.5.2 ( https://developer.nordicsemi.com/nRF_Connect_SDK...
Description:
I’m encountering an issue when connecting chip to a mobile device. During the bonding process, the console log on the peripheral confirms that all three phases...
The watchdog timer is kicking in our code base and I am having trouble tracking down the cause. In a bit to try and debug the issue I disabled the WDT and now I am getting...
Whenever I try to log into Nordic DevAcademy to continue my courses, I am told that my IP has been blocked. I am not sure why this is happening? My laptop is a company laptop...
I am transmitting a buffer of 300 bytes over DECT NR+ connection. The transmitting device is an nrf9151dk running the DECT NR+ modem FW 1.0.1. The receiving device is an nrf9161DK...
Hello there,
I'm working my way through the Nordic Cellular modules and was trying to login this morning. It appears that I am getting repeatedly blocked by Cloudflare...
I'm currently trying to configure the Zephyr HCI USB sample to allow using legacy and extended advertising. Currently when I build the sample with extended advertising enabled...
