I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
Hi
We are seeing board to board variations in actual baud rate from NRF5340 for Baud921600 setting, bit time is varying from ~938k to ~952k the HFCLK is derived from external...
I'm running an asset tracker application using nRF9160-DK.
If it is normal, LED4 lights up in green and data is sent to nRF Cloud, but LED4 lights up in yellow and no data...
Aim 1. To use connectivity device(nrf52840) PCA10056 to program field devices(nrf52840) PCA 10056 using BLE transport. 2. To have a provision to update the connectivity device...
I need to upgrade NCS1.2.0 to NCS1.6.0, the application firmware is downloaded successfully, but after restarting the IC, it still runs the previous application. I think there...
Hi everyone! I'm trying to create gateway from a raspberry pi and I have a question. How can I receive PDU mesh packets without connect to proxy node. I found info, that there...
I get this compilation error when testing the application update example, I have not changed anything to the code.
Same error on SDK v1.6.1 & v1.5.0, nRF9160-dk & Modem...
hello,
I've tried many times from the same browser and same account to download this library but every time I apply for this library I get this email
and when I click...
Hi,
Please answer the following questions：
1.Nrf52 series, can the program run on external flash?Flash is the SPI interface.
2.If it can run on external flash, what...
Hello Nordic Devzone Community,
I'm having some trouble install nRF Command Line Tools on a 64-bit Linux host. From Nordic's page www.nordicsemi.com/.../download I've downloaded...
Hi everyone,
I am working with a custom board fanstel bc840, which use nrf52840, and it is configured like this video explain https://www.youtube.com/watch?v=KSivO9Cf1TE&t...
Hi,
Im seeing some parsing errors and even though everything seems to work fine regardless, i'm afraid it will come back to haunt me at some point. Spec details are described...
Thingy with iBasis or Poland-Orange SIM doesn't register to network.
There is a good GSM signal in my area and few towers in line of sight.
I unpacked Thingy and followed...
Hi everyone,
I am working on nrf Connect 3.7.0, SDK v1.6.1 with a nrf52840.
I am not able to change the filter of scanning, only works with UUID filter.
static int...
Hi!
It must be something stupid from my side.
I'd like to add new device ( first one ) on Dashboard. According the manual I should press on green add sign, but there is...
