Good day,
I've developed a board with a MDBT50Q on it. I'm using the Reg0 DC/DC and LDO Mode Disabled reference circuit ( https://www.raytac.com/download/index.php?index_id...
Hi,
I have the issue that my Zigbee device reports the error "Production configuration is not present or invalid (status: -1)". I followed the guide from this( https://docs...
Hi,
I am using an nRF52840 as a Zigbee NCP. I have built the firmware myself using nRF Connect, and I am also running MCUBoot. Sometimes after some usage, the chip starts...
Hello everyone,
I am testing out I2C on the nRF54L15 for a custom PCB project.
I first tested a simple mpu6050 sensor on &i2c21 on pins P1.11 for SCL and P1.12 for SDA...
I have a bit of an unusual use case where the nPM1300 is quite ideal but need to use an external charger for the battery instead of the internal charger. The nPM1300 fuel...
Hello,
We are currently developing with the nRF9151 and would like to request more information regarding GNSS SNR testing.
We have reviewed the documented GNSS functionality...
Hello,
Is the nrf54 family's I2C peripheral compatible with I3C? I need to communicate with several I3C sensors on the same bus.
If yes, is the software support only...
I teach high school robotics and after the BLE blinky program which works greata with mobile nrf-connect, I wonder what people think is the best, generic BLE
Central and...
Hello,
Can you please provide the input impedance or the S-parameter file of the impedance for the nrf52840 for receive mode, and also at tx power levels of -40dBm, 0dBm...
AD value and voltage conversion between the calculation formula
adc_config.resolution = NRF_ADC_CONFIG_RES_10BIT;
adc_config.scaling = NRF_ADC_CONFIG_SCALING_INPUT_ONE_THIRD;...
Hi, I have a few questions about the nRF52833 DK.
1. Can I fix an antenna array onto the DK to make it a receiver in Bluetooth 5.1 AoA applications? I can see that there...
My LTE Sensor Gateway sample connects via Bluetooth LE to a Thingy:52 and collects the flip state of the Thingy successfully. Now I want to replace the Thingy with the nrf52840...
OS: Windows 10
NRF Repository at branch master, commit bd67811aa123a49cb36991be886f3fafb4730449. Zephyr version: 2.1.0 SES version: 4.20a
Have tried running SES on administrator...
Hello,
I try to run electron app with pc-ble-driver-js and I have this error:
Error: The module '\\?\C:\app\build\Release\pc-ble-driver-js-sd_api_v2.node' was compiled...
Dear Team,
I am migrating the ANCS client application from SDK-12.3 to SDK-15.3 version.
Please find my below observations in SDK-15.3.
Erase the flash completely and...
Hi All,
I'm developing my product based on nrf51822.
I was using keil IDE for that.but i wanted to develop it in Segger instead keil ide.
is segger is supporting for...
Hello, I am working on an IoT project. For this project , I need to send some data using BLE. I developed a firmware for this application based on the sample ncs/zephyr/samples...
HI ,
In our project we are using multiple gpiote and app timer interrupt.
SDK we are using is 15.3
DOUBTS
If both gpiote and app timer interrupt trigger simultaneously...
Hi,
I'm using nRF mesh library v1.2.1 and integrating into my mobile application which I am developing, I implemented provision functionality without errors but sometimes...
I am bringing up a custom board based on the PCA10040.
As the first step, I simply copied (no changes) the file pca10040.h and named it as "my_custom.h". I then defined...
