Using one ADC, the current can be reduced to about 40uA after the ADC value is taken. Using a two-channel ADC, after the ADC value is taken, the current stops at about 0.4...
I'm searching for a software engineer who can help us getting OTA support between nRF52810 and PIC16 MCU.
nRF52810 must have command- and data mode over UART, Pic controler...
I want to be able to read the gyro and accelerometer values from the MPU6050 sensor.
As a base start I downloaded the NRF5 SDK V15.3.0 and modified twi_sensor_pca10056 program...
Hi. I'm using nRF52832, SDK13.0.0.
I should use SHA256 and MD5.
I made my code as below.
NRF_CRYPTO_HASH_CREATE(init_packet_hash, SHA256); NRF_CRYPTO_HASH_CREATE(init_packet_md5...
Hi. I'm using nRF52832, SDK13.0.0.
I want to use SHA256 as below.
output32Byte = SHA256[input32Byte];
Which function or example can I refer to?
And also I want to...
I tried to port the example "ble_app_ipsp_initiator" to pc-ble-driver and run on Linux. The peer device is another PCA10056 device running ble_app_ipsp_acceptor. The problem...
hi...
i want to use two uarts in nRF52840 , one uart to one pc and another uart to another pc .Data should be transferred and received between the nRF52840 and pc how can...
Hello Team,
We would like to keep the necessary build configuration for a board in Bitbucket,which are necessary to show up the "Build" folder in VS code.So that every developer...
In our project we want to trigger the saadc with the lp_comp and read Analog input once for 2s (with 2000 Samples). In the lp_comp_handler we call:
We have set the Sample...
Using SDK 2.1.2 Trying to set up connectable advertising for specific period of time and be notified when this period of time expired. My setup sequence (simplified for demonstration...
Compilation environment ：nRF Connect SDK V1.4.2
I successfully subscribed to a notification property of the peripheral using bt_gatt_subscribe, the callback function is...
We are converting our existing product firmware from the NRF environment to Zephyr. We use both simple PWM for which the conversion is no problem, and the more complex PWM...
Hello.
I am trying to learn how to implement unit tests for embedded c-application. I created simple example about my problem and I am having hard time actually running...
Hi Nordic support team,
I'm new to Nordic chip and using nRF5340 Audio DK for my project,
and I'm trying to build zephyr/samples/blutooth/iso_broadcast_benchmark , which...
Hi.
I'm doing a customized board with NRF5340 and need to minimize all the general inductance on the board.
I would like to change L2, L3 and L4 to 5.6uH. Is it possible...
Hi,
I'm using a circuitdojo feather nrf9160 I want to use the nRF cloud but I got some trouble connecting. Something is missing, but don't know what.
This is what I did...
Hello everyone,
I am using the Power Profiler Kit II (PPK2) to measure the deep sleep current of an ESP32-H2 when running the boilerplate OpenThread deep sleep SED program...
Hi
We have nRF52840 + FEM in our design. Output power level is mainly controlled by the nRF52840 TX power setting which drives the FEM. However, the txpower options is...
Hey, After updating the nRF Connect SDK v2.60 (from 2.3.0) package an attempt to turn a BLE carrier ON by sending the BT_HCI_OP_LE_TX_TEST_v4 DTM command over the HCI interface...
Hi,nordic teams
im develop a keyboard use nrf52840 by ncs sdk 2.6.when i test the dfu funcation by python file ,there is 2 problems .
1.the usb dfu is so slow that i need...
I want to add a custom at command in the SLM example . I follow the https://developer.nordicsemi.com/nRF_Connect_SDK/doc/2.6.1/nrf/libraries/modem/at_cmd_custom.html , enable...
Hi.
I have a problem.
I changed project settings 52832 -> 52840
on 52832 the project work perfectly.
using 52832, SDK 15.3.0 S332, ble, ant, ble dfu.
now I wanna...
