I thought this should be very simple but it has not turned out that way. I have started with the pc-ble-driver heart rate monitor (peripheral) example. I was able to take...
Hi,
I building a gas meter monitor ( peripheral ) that transmit meter reading to the Central.
The gas meter will be sending to the Central it's ID and meter value ( uint64_t...
The International Conference on Embedded Wireless Systems and Networks will host also this year a dependability competition to benchmark the performance of state-of-the-art...
Hi,
I find the CSCS example program reading zero at low cadence levels below around 50 rpm.
Using ble_peripheral example ble_app_cscs loaded into the PCA10040 board or...
I had manged to deploy and configure mesh networks on Nordic Thingy devices based on these 2 examples separately. 1. Generic OnOff models https://github.com/NordicPlayground...
Hello,
I am unable to access my SRJ profile with email id [email protected] due to two factor authentication. i do not get anything in the google authentication app...
I am developing a product using the nRF51822 BLE, I was able to interface all my peripherals and setup the softdevice stack accordingly.
Now I am looking to add a pairing...
Hi Dev team,
I have an application working on the Thingy91 that sends the data of the sensors through MQTT to our server. I was interested in knowing the data usage of the...
Hi All!
I'd like to ask if anybody succeeded running zephyr without optimizations?
For ex. i have a following code:
Now i have following problems: 1) If i set...
Hi,
We got carrier frequency tolerance failure in a certification test.
The max deviation should be under 20ppm, but the result is above 30.
We used DTM example...
I'm working in a project where I have to use produce a PWM signal which actively drives the pin low for 0, and disconnects the pin for 1. The PWM is generated by an in house...
Dear Members,
For checking my LF 32KHz crystal is working,
XL2 is the output of the crystal ? or vise versa ?
So XL2 to the scope and the other probe to the ground...
Greetings,
I'm trying to develop a project on the nRF5340 DK where I collect measurement data from an I2C sensor (LPS27HHW) before sending the data via bluetooth. My firts...
Hello i'm trying to run a sample from my projects but each time i'm getting the CMake error i tried changing project and running from another directory but the problem still...
Hello,
we try to add DTLS to the CoAP client example . We have problems with the DTLS connection. The handshake with PSK works. The first CON or NON query works also without...
Hi! I developed a locator and beacon pcb boards for AoA direction finding using the NRF52811 chip. The locator has 4 patch antennas and the SKY13575-639LF external antenna...
Dear Members,
I want to use MAX17048 and getting thiis message :
<error> app: ERROR 33281 [NRF_ERROR_DRV_TWI_ERR_ANACK] at ..\..\..\MAX17048.c:71
void MAX17048_init_i2c...
I have found an issue with ESB/Nordic radio where it will receive a packet on the wrong pipe. I think the issue occurs when the prefix array set to the PREFIX registers contains...
While testing our custom Hardware with the nRF52840 in a climate chamber in the -40°C to +85°C range i noticed that the value read from the internal temperature sensor was...
Hello,
let me explain my problem as below.
after doing pairing between nrf52832 and phone(android app). phone is central (including scan behavior)...
after success...
