Hello,
Fllow the guide of Configuring and performing DFU over Mesh,I can update firmwre successful use DFU:
Source: Example/Dfu
Target: Blinky(about 180 segment)
But...
I'm trying to add a second element to (light_switch\server) (SDK_for_Mesh_v5.0.0). I've already have a look at this post , it gives an idea but I found that it's not applicable...
Hi,
Again the topic which has already been discussed several times in this forum. I just want to share my experience and perhaps help other users having difficulties.
...
EDIT: We found the reason for this and it is a hardware issue. This question can be deleted as it is no longer valid.
-----
Hello,
We are currently developing a...
Hello,
I would like to obtain some information on the possible substitutes for the nRF51822 (BGA Packaging).
I received notification that right now only the final orders...
I am using the nrf9160 for an OTA firmware update application. I initially executed the fota download file from the http_application_update sample project in it's default...
Hi Nordic Team:
I'm using the coap server example. I created a test task that will always send UDP messages. During the test, I found that the device would restart. Here...
I have been debugging all morning my nRF52840 board V2.0.2 toolkit with vsc and it suddenly stops connecting.
I now get this error.
I have no problem flashing the board...
Hello
Currently i am checking any time synchorinization function in pyACI script to synchoronize and send it to all the connected nodes in mesh to get the data with time...
nrf9160 fails to form a connection when all bands are enabled, and the available band is higher up in the list. Following was the exact test scenerio:
Connection attempt...
Where can we find nRF7002 Development Kit distributors in Europe? We want to try this product and evaluate to see if it would be suitable for our proyect.
Hello,
I am receiving MQTT input error for my AWS IoT connection. Docs says it is an AWS policy problem here ( https://nordicsemiconductor.github.io/asset-tracker-cloud...
Our project consists of 1 to many sensor devices using hte UBlox NORA B126 (nRF5340) processor. Via Zigbee network, these end points connect to a Zigbee coordinator, which...
I have noticed that when installing the nRF Command Line Tools, it will automatically upgrade my computer's JLink driver program, which is currently updated to V7.66a. At...
Would you like to know how to access the produte nRF9160 intrinsic safety certification? I needed this certification, to find out if the product meets intrinsic safety requirements...
Hi there,
Normal pins on port 0 can be accessed just like from document. But for pins on port 1, how do I access them? For example for a pin 6, I could do
NRF_GPIO->DIRSET...
Hi,
I'm working on the nrf5340DK and testing power comsumption. I have obtained less than 4uA with the peripheral lbs exemple. To achive this I disabled loging and serial...
Hi
I am using nrf52832 s132 with s132_nrf52_7.2.0, sdk17
so far have successfully updated application and bootloader with an adaptation of buttonless DFU, now I have an...
Hi,
Our client has about the hardware design of nrf52805. There is a big difference in sensitivity between the boards of the front and back batches of pDTM test, poor sensitivity...
Hi,
1. Normally, we use the SWDIO and SWCLK interfaces to download programs through JLink
2. In some cases we did not leave the leads of SWDIO and SWCLK.
3. When we...