I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
I've started to get this error when trying to do a DFU update on nRF Toolbox (v5.0.8): "Can not create Firmware".
The same firmware file worked before on the same device...
Hi. I'm using nrf5340. I confirm internal clock(LFRC RC osc) exist,I want to remove external 32.768kHz X-tal. If yes, how can I turn on LFCLK RC oscillator in my source code...
Hi,
I was successfully able to flash the peripheral_uart code to the dongle and then connect to the Nordic APP.
But it does not connect with the UART when in BLE mode...
I am working on nrf52810. I raised the RAM size in the linker file, which is larger than the real physical RAM capacity, for the testing purposes. I anticipate a hard fault...
Hi:
I use mqtt_ Sample routine: MQTT is connected to the server, and I shut down the server. At this time, the 9160 status has not been updated, but is still connected....
Hi
1、Now we connect the VDD to the battery voltage (3.4-4.2), and the VDD_GPIO is fixed at 3.3V. In order to match the GPIO of other peripheral cpus, will all GPIO be connected...
We plan to use the 52840 to make a module with an external flash, if we apply the QSPI peripheral, must we use the P0.23,P1.00,P0.21,P0.25,P0.19 pins recommended in the specification...
I want to run my software on nRF52832. It is already running on nRF52840.
What are the changes I would require making this transition.
We are using soft devices and all...
Hi.
Please help project evaluation.
The project is a BLE HID mouse , it need playback LC3 audio sound sometime.
Can we use HID function and LC3 function at the same...
Hi,
I am unable to connect and program a custom board with nRF52833 after performing 'Erase All' using Segger IDE (V5.66).
Those boards were programmed a few months ago...
Hello! I am a total newb but trying to self-learn embedded programming / electronics. I recently received a nRF52840 development kit and followed instructions at https://nordicsemi...
Development environment :
ARM-GCC version - "gcc-arm-none-eabi-6-2017-q2-update"
nRF SDK version - nRF5_SDK_15.2.0_9412b96
nRF Mesh SDK version - nrf5SDKforMeshv310src...
Burn the firmware of nrf/samples/bluetooh/multi-adv-set, the mobile phone scans the broadcast of 2 mac addresses.
How to set multiple broadcasts of nRF5340 to the same mac...
I'm trying to use BLE and radio synchronization with a nRF5340. For this I need to integrate radio synchronization and HCI RPmsg into the nRF5340 NET core. My synchronization...
