Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
I want to debug my adafruit feather nrf52840 sense with my nRf52840dk I followed this link: FAQs | Bluefruit nRF52 Feather Learning Guide | Adafruit Learning System
But...
Hi,
I am having a connectivity problem with a central Bluetooth device (nrf52832) that has to be connected to a peripheral (nrf52840), previously this connectivity worked...
I had a simple blinky application. With this application running I was able to flash a new version in the nRF52480 SDK board at address 0x0086000 with JFLASH. Pressing button...
Hi,
When sending a command using Zigbee, I understand the best method to use is by using:
So when calling light_switch_send_step, I use:
Which in turn calls below...
I'm trying to connect a nRF52832 DK to a secondary device (BLUETOOTH LOW ENERGY TINYSHIELD (ST)) where the nRF is the central. The example correctly connects to the board...
Hi,
I aw various other posts ( )
and the post on Optimizing power on nRF53 designs but I never get results that low.
The Blog post doesn't really help, since it only...
Hello People,
I was working on the example program of timer (PCA10056) and it was working fine, but when I change the same code to work on PCA10100 it is not showing any...
Hi,
I have integrated HID mouse and keyboard, when my custom board was connected with computer, there is "hello" on notepad. But when I pushed "CapsLk" key, RTT viewer did...
Hello.
I try to add my own board to Zephyr. I made copy/paste nrf52833dk_nrf52833 and change file names and keywords. New folder is in: "C:/ncs/zephyr/boards/arm" . Unforunatelly...
Hi,
With reference to the below image:
As you can see I have 2 UART threads running on priorities 14, at baud 115200, which are I believe blocking the MPSL signal...
In order to get some more insights in energy consuming "network searches", I tried to keep track of the LTE_LC_NW_REG_SEARCHING and LTE_LC_MODEM_EVT_SEARCH_DONE events.
...
Hello,
I am working on a customized mqtt_simple version on the Thingy:91 to measure vibration and temperature data and send data in about 4 minutes rythm to our server...
Dear Mate,
I am trying to build and flash a program by using (+) Add DFU support to your application - Software - nRF Connect SDK guides - Nordic DevZone (nordicsemi.com...
