I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi,
I am trying to get the PWM120 to work on nRF54H20 using SDK 3.1.0
As the starting point I am using the dimming PWM example which is working and I can get proper output...
Hey there!
I am currently in the process of building a module that drives a high-res OLED display using QSPI. Until now I've used a RP2350 with PIO and DMA for this and...
Hi everyone,
I AM LOOKING TO HIRE SOMEONE TO HELP ME WITH THIS OVER A ZOOM SESSION ASAP. PLEASE DO READ ON IF YOU CONSIDER YOURSELF SEASONED/KNOWLEDGEABLE IN THIS AREA....
Hi Team.
NCS: 3.0.1
Board: nRF54L15DK
I am adding a custom attribute of struct data type into the standard Occupancy Sensing cluster (0x0406) in matter template sample...
Hi,
we are confused:
The PS of the 9160 has the single Note: The LTE modem requires use of LFXO as the LFCLK source .
But looking at the reference schematics for the...
I have tried the following to no avail.
Tried 2 different laptops of Windows 11 with 2 different USB cables.
Tried ext power supply at 3 volts with SW10 set on.
Set...
HI
I am currently using NRF54L15 with SDK version 3.0.0, and I want to implement GRTC auto-reload without using interrupts. My main goal is to reduce CPU usage and utilize...
When programming my NRF52832 target card with VScode, if I don't use debug play, the code doesn't execute. What could be the reason? I don't have this problem in Segger Studio...
Hello:
I was using VS Code normally. Suddenly, I opened a folder and received the screen below when selecting nRF Connect. Note that no information appears. Line 7 of the...
Hi,
Today I have received nRF54L15 DK from Digikey UK and planning to connect a low power VGA camera for a mobile application over BLE. Do you have any recommendations...
I am currently debugging the nrf52832 project developed using the nrf5SDK.
I will encounter SOFTDEVICE: ASSERTION FAILED from time to time, like this:
I don't have a...
Hello,
I know this is a documented error but I'm still struggling to fully understand and fix this.
Context:
I'm trying to make my custom display driver working again...
Hi~
I'm using an nRF52 DK connected to the nRF54L05 with jumper wires for the flashing operation. I've confirmed that the DK works correctly, as it can successfully program...
hi support team,
customer is preparing to use 21540, only use gpio mode, not using spi interface,
may i ask how to deal with spi pins of 21540, float or pull up to vdd...
Hi,
I'm having trouble with the Matter Test Harness randomly failing tests and failing to commission my device. I have tried this with both my own Matter device and the...
