I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
OS: Windows 10 64bit
SW: Segger Embedded Studio 5.10 nRF SDK 17.0.2 Softdevice S140
HW: nRF52833 2020.6
Hello,
I had found an example integrating the ble_app_uart...
Hey I'm currently trying to update the nrf9160DK_52840s bootloader through the nrf9160DK_9160 by which i mean:
-Send bootable image_52 over LTE or USB to 91
-Have a check...
Hi there,
We're in the evaluation of sending large payloads with nRF9160.
The payloads are 4-5MB in size which will come from an external flash chip.
The payloads...
Hello,
I try to upgrade my project from NRF5 SDK 15.3 to 17.0. I like to begin with the bootloader, therefore I followed the steps from
https://infocenter.nordicsemi.com...
Hi,
I'm playing 52832 ble_app_hrs_c Central example with latest SDK 17.0.2 and SD7.2.0.
The wierd thing is that after the service discovered, next enable cccd. But nrf_ble_gq_item_add...
I am using the nRF52-DK board to debug external board. So I am using the P19-Debug out cable.
And recently, I notice strange behavior as the on board nRF chip also get programmed...
On Nordic reference schematics the nRFxx symbols are designed with pins in all directions (up, down, left, right)
with the pin numbers 1,2,3.. placed in a 'PCB layout view...
Hi,
I have a board Actinius Icarus nrf9160 and I'm trying to program with external hex file through nrfConnect sdk and Actinius programmer.
Loading prebuilt example works...
Hi,
I modified the example: nRF5_SDK_17.0.2_d674dde\examples\ble_central_and_peripheral\experimental\ble_app_multirole_lesc to run on a serialized connection mode with two...
Hi, I used nRF52832 chip set and nfc antenna. I am attaching schematic please check and help me regarding. Capacitor value changed and checked for 100pf, 430nf. Resistor value...
I have download "ble_app_uart_coexist" example to my kit nrf52832.
I can find it in nRF Connect for android, but can't see it in nRF Mesh.
Exactly how it work?
Hi
I have two questions about nRF52832 QFAA Custom PCB.
1)
When I calculate load capacitance for external crystal.
Is this fomula(C1,C2 =2Cl - Cstray {Cstray ...
I have been off and on trying to get ETM Trace working with the nRF52840 and Segger Ozone. It mostly works, but because the CPU clock runs at 64MHz and the Trace clock runs...
My company has been working on making some devices that utilize Wi-Fi to be able to connect a device to the internet to view status and allow a device to be remotely controlled...
Hi,
I try to design NFC tag antenna with NRF52832. I have read many documents about NFC antenna design but can not find about relationship between range and inductance....
