Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello,
I have an iOS application communicating with a custom device having a nordic 8001 chip.
They have established a bonded relation. In nRFgo Studio, in Security...
Hello,
I am trying code (and compile) in C++ with a NRF52832 on Keil UV5.
In the C/C++ options i don't see the compiler option for the preferred language when I open a...
software version :nrf connect SDK 1.6.1
hardware:nrf5340
ble stack:ble 5.0
ble central: iphone x app
ble client:nrf5340 kit
question:I was failure to set Tx len...
Hi, I followed the procedure described here with Nordic Thingy 91 https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/nowi-powered-energy-autonomous-nordic-thingy...
Hello,
I'm currently trying to enable static buffer for MBedTLS as described here: https://tls.mbed.org/kb/how-to/using-static-memory-instead-of-the-heap .
I wrote a simple...
Hi, guys. I'm using both nRF5 SDK v17.1.0 and the S112 SoftDevice v7.3.0 with the PCA10056 (Rev 2 nRF52840 board).
infocenter.nordicsemi.com/index.jsp
I used the sd_ble_gap_ppcp_set...
Hi,
1. In freerTOS, how to improve the printing priority of NRF_LOG_INFO
2. How do I avoid overwriting what I want to print
Thank you for all your assistance. Kind...
Hi,
1.How can I use this function?
2.Can you provide a simple example
3.I have the following information, but I still don't know how to use it.
https://developer...
Hi ,
1. How do I port the NCS V1.8.0 asset_tracker example to NCS V1.9.0
2. The customer code was developed in asset_tracker and failed to port to NCS V1.9.0
Thank you...
Hi,
I have a few thingy:91 devices (~10) and when using the IBasis SIM card, I'll randomly be connected to Telus, Bell, Rogers or Videotron. Some of them do not support...
Hi,
I have implemented BLE OTA DFU using SMP service (I integrated SMP sample ) on nRF25833. Version of NCS: 1.8.0.
I have tested it with nRF Connect mobile app and it...
I want to make a thread protocol based luminaire product, there will be 300+ luminaires and 10+ OTBRs, and then control them through the cloud platform. Now I need to verify...
Hi. I apologize in advance if this question is in the wrong place or is too elementary for this location/audience. I have prototyped a product using two Nano 33 BLE arduinos...
Hello, I developed for my customer, a ZigBee coordinator in last 2019, using nRF5 SDK for Thread and Zigbee v3.2.0. Now I'm debugging to add one new feature, but some time...
Hi
I want to use a mcu to update the firmware in the nrf52810 through uart,I look in the sample in the nRF5SDK1702d674dde\nRF5_SDK_17.0.2_d674dde\examples\dfu\secure_bootloader...
