SDK_9.0.0
I was trying to implement 2 different UART connection parameters so I decide to use re-initialization.
My initial parameters included APP_UART_FLOW_CONTROL_LOW_POWER...
I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
Board: nrf52840 DK SDK: Zigbee 4.1
Hello,
I am currently in the process of reducing the power consumption of our application. One method I want to explore is switching...
We are using nRF52840 DK with SDK17, our aim is to achieve Eddystone packet advertisement and connectable mode using FreeRTOS. Implementation started with ble_app_blinky example...
Hello,
I want to use BLE Direction Finding solution. However, I couldn't find any documents or any software library. Is there support in SDK for direction finding ? Are...
I request detail information about the UART internal implementation of the UART in the nRF52810 microcontroller.
Many application are used in noisy environment.
From other...
Hi
I am trying to flash the device with the bootloader, the soft device and the application, because I do not want do the OTA update at production.
I used the following...
Hi,
I want to control leds of nrf 52840 board through raspberry pi 3 B model uisng python.
I used interactive pyaci example for provisioning nrf sdk board, but it requires...
I am using NRF52840 development board with SEGGER Embedded Studio (Nordic Edition)
I downloaded example code to target board. The software run with Zephry. I found function...
I tried to follow this tutorial to set up the Connect SDK toolchain with CLion. It worked until I resetted the CMake Cache. Now it always gives me this error message.
...
Good evening,
I'm analyzing the FreeRTOS HRM example for PCA10040.
I'd like to understand the meaning of the following comment available in your code in order to prevent...
I am having a very strange problem with timers and the PPI channels.
I am trying to take a fixed number of ADC samples at 1 ms intervals starting at a fixed offset in time...
I'm trying to set up the nRF Connect SDK Toolchain on Ubuntu 20.04.2 LTS x86_64, following this manual.
https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.5.1/nrf/gs_installing...
I have plugged in the NF5340 development board into a USB port on my laptop with a USB 2 cable, but LED 1 does not light. Only the LED next to the light PCA i.c. lights -...
Hello,
I am using nRF Connect for Descktop for Windows 10 v3.6.1, and the nrf52840 Dongle.
Is it possible to scan / connect to BLE 5.0 devices (with PHY Coded) using...
Hello,
I'm working with nRF52840 dongle, i installed nRF Connect on ubunto 18.4 and i am using python3. After installling pc-ble-driver version 0.15.0 in python3 i tried...
I start the sniff and see packets from all advertising peripherals in the area. I select my peripheral in the Device dropdown list. Then I see a string of "ADV_IND" packets...
