Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Is it possible to modify beacon properties of iBeacon and Eddystone in one application?
I am creating a android application, I need to modify properties of beacons and...
Hi
I am going through the ble_app_multirole_lesc example and I can see the following line:-
/* Due to DRGN-7235, dhkey_reply() must come after auth_key_reply() */
...
Hi community,
I'm using the multi-link peripheral example from SDK v6.1.0 with s110 soft device version 7.3.0., this is cross-compiled with arm-none-eabi-gcc.
The both...
Hi all - Im porting projest from Keil4 to Keil5 and am now stuck on this error - division by zero in SDKs sources:
*** Using Compiler 'V5.06 (build 20)', folder: 'C:\Keil_v5...
Hi, I can't seem to find any hardware design guidelines for the nRF52832 chip, I can only find hardware information for the development board.
Best regard Thomas
we add static pass key in example code hrs with dfu，but when connecting with phone，input passkey on phone，the nrf51822 will reboot device_manager_cnfg.h
main.c
Hi Guys,
I'm working with nRF8001 BLE with PIC18F microcontroller, well i have succesfully completed my project but their one last thing i have to add i.e sleep and wakeup...
Hello Nordic,
For my application I need to log external and internal events/state of my device. In order to do so, I need to find a way to keep track on time. I do not...
Issue is similar to
devzone.nordicsemi.com/.../
I'm developing an application based on latest SoftDevice 130_1.0.0 and using two or more DevKits.
My application starts...
Hi. My app based on S130_1.0.0 and is run on DevKit with 51422 chip. App advertises and scans at the same time with next params:
adv interval = 20mS;
scan...
im using nrf51822. before entering DFU mode I want to save data in flash. but when I call pstorage within reset_prepare function, it doesn't jump to DFU mode !!!!
reset_prepare...
Hello guys, i'm new in nRF51 DK board, and i would like to flash the .hex file to my board, but when i do it the board automatically unmounting himself and reset with the...
hello there i want to send negative acknowledgement then what should i do?? like i want to send some data and then i want to send negative acknowledgement
i am trying to use yggdrasil for nrf51422 (pca10028) with sdk 10.0. after installing, i cannot see the com port. How do I flash "connectivity_115k2_with_s130_1.0.0.hex" with...
