Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello,
I have an iOS application communicating with a custom device having a nordic 8001 chip.
They have established a bonded relation. In nRFgo Studio, in Security...
Hi,
I am evaluating the ble_app_hrs_pca10056_s140 project with nRF5SDK160098a08e2 Dev kit and nRF82540 dev board.
I have put a breakpoint in line:
*p_erase_bonds = ...
Goodmorning,
what is the maxium current output for SPI pins on the nRF24LU1? The datasheet say "IVDD External load current" of 2mA, is this refered to the internal regulator...
In the documentation of the nRF SDK for Mesh v4.1.0 is written: "The following figure demonstrates how the data packets flow between mesh nodes and their layers within the...
Hello
Beacon using timeslot API
I am trying to implementing a beacon functionality using your timeslot API.
The beacon shall run in parallel to the normal SoftDevice...
Hi all,
In our application we have a piconet master (acting as GATT client) and several piconet slaves (acting as GATT servers). We have only limited time on the channel...
Hello,
I've asked this question already at StackOverflow, and while I try Wireshark I wanted to see if someone has experienced the same issue and/or can provide further...
I can scan beacons with Scanner. and can use NUS (ble_periperall\ble_app_uart ) to get connect with device.
My goal is to combine both application Have NUS Service to connect...
As most developers using Nordic's SoftDevice quickly find out, halting the processor (e.g. hitting a break point) results in a fault and requires a reboot. This makes debugging...
we want to use nRF52833 as BLE5.1 AOA/DOA locator,here are some questions about to how to use it:
How many antennas are needed for direction finding/positioning? Is 6...
Hi everyone,
I have added the Characteristic User Description in order to add a human-readable name for my characteristics. However, the name still appears in hex format...
Hi everyone,
I have created a vendor service that works fine. Now I want to create a second one. What is the most efficient approach for doing this?
For the first service...
I am following the Zigbee Device Upgrade OTA tutorial and have run into an issue flashing the server firmware using a j-link and Particle Xenon dev board.
Environment Details...
Hi all,
I seem to be having a problem with running nRF connect for desktop 3.3.1 on MacOS (10.15.3). After installing the package to the application folder, on launching...
Hi,
When configuring a GPIO as output with DRIVE set to D0S1, i.e. "Disconnect '0' standard '1'", what is the leakage current when GPIO is set to 0, i.e Disconnected?
...
Hello,
I'm porting from ST32L151 to NRF52840.
I want to use the HMAC SHA1 method, but I can't see the related function.
The nrf_crypto_hmac_init function seems to...
