Hi,
I'm using redbearlab's nrf51822 board. It is a arduino compatible board and hence it is using 0,1 (mapped to 9 and 11 for nrf51822). How do I make printf print to this...
An external PA/LNA is used to extend range of nRF51822, and S110 is used for BLE, How to switch between PA and LNA? and how to disable PA/LNA when there isn't transceiving...
Hi...
Can anybody help me to run ble_peripheral example (ble_app_hrs for S130). I have build and load the code successfully but cant see the advertisement. But while debugging...
I am working with the nRF8001, and I'd like to create a services.h file that will let me broadcast battery level and as well as allow temperature to be read by a peer.
...
Hi We have an application where we what to read i2c sensor data over the air to an iPhone. We've taken ble_app_uart_S130 project and grafted in some twi_hardware code. There...
I am interested in the S130 ability to hold 3 central -> peripheral links over BLE, and am looking for some evidence that this has been accomplished with extremely low-power...
I'm trying to implement channel scanning in our nrf24lu1p based USB dongle.
I'm following the specs and basically loop though each channel ;
loop
stop listening
set...
Hello,
I have developed a Zephyr BLE project with the MAX30102 sensor. I tested the code successfully with the nRF52833 DK, and it works fine. Now, I am trying to flash...
Hi,
Our system includes an nRF52840 (ncs2.4.0, zephyr) as a Host and a NAND (Macronix MX35LF2G24AD) as a flash; communicated with each other via SPI.
At Host, we can do...
Hi,
My customer tried using the keyboard we made based on nRF Desktop with NCS version 2.1.0 with an iPad and noticed that most of the keys work, but space bar does not...
64 bit unique device identifier. DEVICEID[0] contains the least significant bits of the device identifier. DEVICEID[1] contains the most significant bits of the device identifier...
Hi there,
I have successfully enabled CDC ACM Serial Recovery mode on the nRF5340, which allows me to update the application and network core with two separate .bin files...
I'm trying to create a board configuration for MicroPython under the Zephyr port for the nRF9161 and add functionality to use the DECT modem. I'm following the example code...
Hi
I have used the nsc-sbom utillity to generate an SBOM for my project.
However, instead of the HTML output format I need to generate it in a FDA recognized format...
Hello,
I'm currently working with the nRF9160 to utilize Cellular Monitor to connect the board to a cell tower. It is capable of connecting and filling out the chart in...
I have bought a brand new nRF52840 Dongle that I want to flash. I have installed nRF Connect for Desktop from https://www.nordicsemi.com/Products/Development-tools/nRF-Connect...
We want to use the nRF7002 in our product and supply it with energy using a LiMnO2 cell in CR2 format. The LiMnO2 cell has a nominal voltage of 3.0V and a maximum voltage...
GPIOTE has higher current consumption than port events. We are trying yo use PORT events to detect GPIO inputs with buttons. But we are not successful, is there any example...
When I follow lesson to do exercise that lesson 2 exercise1 step 7.4.2,I press button 1,I can see the led1 turn to light but no log message in the debug console.
The debug...
We are preparing for all of our radio compliance testing. Our board is inspired from the nrf9160dk design using the nrf9160 chip as the main controller and an nrf52840 flashed...
Hello!
I am having issues configuring a signed application, is there any way to build a signed application for the mcuboot bootloader without building the mcuboot alongside...
Hi, I'm trying to use the VL53L0X sensor driver with zephyr and nRF52833, but I'm getting errors when the driver is trying to calibrate.
Below are the errors returned by...
