I am working on an application and need to get the exact time that the master node receive advertising from the slave node. I tried with PPI and it's ok to capture the Radio...
Hi, could you please tell me if my assumptions below correct?
Measuring a (ratiometric to VCC) analog signal and selecting VDD_1_2_PS as the reference selecting AIN_NO_PS...
When I initialize the SoftDevice with SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, false); // Sets up Crystal Source to 20ppm 32.7628kHz
The project I based...
I am trying to make a product with NRF8002B. I finally have the product prototyped. The user will connect to the device, beep, light up, and track. It will always stay on...
Please,
It seems that "Flow Control" signal is not available on nRF24AP2-USB.
EVENT_TRANSFER_TX_START event message appears only one time after the first data packets...
I am looking for cheapest (up to few hundred USD) and simplest Arduino basic solution to track real-time RFID tags distance (also direction if possible) without additional...
We are having nRF51 dongle which is having USB compatible. But My test systems only have the option for DB9 with UART support . Is there any possible to convert nRF51 Dongle...
Hello.
First some background:
I have an application running on nRF52840. Development began with the nRF52832 using nRF SDK 13 or 14. Then migrated to 15.2, 15.3, and finally...
Shalom!
I have a nRF9160 DK board that I am using before our custom hardware prototype is ready. My application is based on the UDP example code skeleton along with code...
Dears,
Is it possible to change the -64dBm threshold to something else in the wireless module? (example: -70dBm, -75dBm).
I´ve seen in some forums that there are other...
Regarding the Nordic guidelines for aQFN, it recommends to use 0.305/0.61 for through hole via pad,
We want to modify the PCB pad as shown in the picture below,
and keep...
Dear ladies and gentlemen,
I found the following page giving instructions for porting an example from pca10056 to pca10056e:
https://infocenter.nordicsemi.com/index.jsp...
We are trying to implement UART driver that will work together with SoftDevice. We can't use UART or UARTE with single-byte buffers since high-priority task like SoftDevice...
Hi,
I am using nRF52840 and Mesh SDK 5.0.0. I want to add a DFU feature in Mesh Light Switch Client and Server example code. I have generated zip files for the Client and...
Hi everyone,
I am new to nrf community. Currently, I am trying to develop an IR transmitter on NRF52832 DK which transmits HEX codes for IR (not raw data). I am unable to...
Hi there,
I worked myself through the Matter DoporLock example including commissioning into a Thread Network using OTBR. I find manually obtaining the credentials from the...
Hi All
Do you know of any Mobile devices/Apps supporting Bluetooth5.1 and Direction-finding currently on the market (or planned to be)?
Is it going to be added to nRF...
err_code = sd_ble_gap_adv_start(m_adv_handle, APP_BLE_CONN_CFG_TAG);
nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
I would like to ask that for the above...
Hi there,
We have a mesh network which runs now for quite some time on our own hardware. We are using heartbeat messages to collect RSSI values between nodes in the network...
