Hi,
I am using ADC without external reference and no analog input in order to measure the battery level with a timer (code at the end).
I am also reading several ports...
Hi,
I'm programming the nRF51822 and save some user data into the FLASH by using pstorage_update . It works fine if I set system off mode, and wake it up. I can read back...
Hi,
I have been using nRF51822 with my Android app using Android's Bluetooth Low-Energy APIs.
In order to get more details, I am currently working on integrating the Android...
I'm looking at interfacing a typical Wheatstone bridge sensor to the nRF51822 ADC. This particular sensor only requires a mA or two for excitation and the output fits within...
When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I'm having trouble debuging an external module with the j-link included in the nRF52840 DK. I'm using the debug output provided in the P19 connector.
The connections are...
I am using the nRF5 SDK Version 15.2 and nRF52840-DK to model a custom service containing five characteristics along with the standard BMS and DIS service provided in the...
Hi,
when sending small 11 byte messages on the mesh nrf52840 S140 mesh 3.1 Only every 3rd message return status 0, the rest returns status "Device is busy". I know this...
I am looking at routine 'spi_master_using_nrf_spi_mngr', I found "#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1 " in the sdk_config.h file. Is this part of the routine...
Based on this question I've assumed that it's possible to use nRF52832 for providing Bluetooth connectivity to an embedded Linux platform.
A quote from the github repo...
Hello.
I merge into embOS start project some peripheral example from Nordic like the Serial and spi ones. In the Start I chose the CMSIS one without a specific MCU and bring...
hi,
i am using sdk 14.2.0 multi-link central example,
my aim is to connect multiple sensors (up to 8 ble peripheral devices) with extended packet enabled.
sensors will...
Hello all,
I'm trying to connect to custom Board with nRF52840 controler.
nRFgo Studio (V:1.21.2.10) gives error "No device detected, or readback...".
I've also tried...
Hi there!
I have the following setup:
A Raspberry Pi 3 B and a nRF52840 Development Kit acting as a Border Router as described in the official documentation ;
Another...
Hi!
I would like to know if it is possible to use the nRF52840 to read a mifare classic 1k card?
If it is, is there an example for this?
Thanks!
Andreas
I am currently developing a code that will serve as my pulse sensor. I am now trying to write the code in VScode, for it is very appealing to me. The problem now arises with...
Hey
This is sumanth. I have worked on light switch example with server, client and mobile as provisioner. I would like to develop a mesh network where the server has to...
history: https://devzone.nordicsemi.com/f/nordic-q-a/44018/softdevice-invalid-memory-access-info-0x2/172932#172932
compiler: keil
To solve the hardfault issue (SOFTDEVICE...
