Hello Nordic team,
What is the image frequency of the nRF54L15 receiver?
We need this information for Bluetooth SIG RF-PHY qualification (RFPHY/RCV/BV-03-C, RFPHY/RCV...
Our prototype is back. At first, I used NRF Connect to flash it, but the official PC software couldn't flash the firmware. I followed the wiring instructions: (1) connect...
We are developing an application based on the nRF9151 using NCS 3.1.1 and modem firmware mfw_nrf91x1_2.0.3 .
We would like to use Proprietary PSM to control the modem's...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hi there
So I want to make an application to send mqtt messages over wifi. I have tried to follow the devzone guide: to implement the mqtt api into my software (Mostly the...
While building my first blinky project using nrf connect on VS code it is showing following errors:
C:/ncs/v2.6.1/zephyr/scripts/kconfig/kconfig.py: C:/ncs/v2.6.1/blinky...
Hello,
How can I add serial SRAM or serial Flash to a Thingy:91?
On the nRF9160DK there is 64 Mb external Flash onboard but I assume there is no external Flash on the...
I want to decrypt some packets caught in LE Audio(Using the sample:nRF5340 Audio application), but need the link-key.
According to this case , I add these to prj.conf to...
Hello,
I am using uart with thingy:91 to communicate between nrf52 SoC and nrf91 SiP, i am able to receive data from nrf52 but when i try to send data to nrf52 SoC the function...
I integrated the sd card code into my main code in which the the wifi module (nrf5340 + nrf7002) receives uart data from a different device What I need to do is that whenever...
Hi!
I am using BLE Central sample of nordic connect sdk. Upon running it on nRF52832 it successfully scans for peripheral, and display its Random MAC address, is there any...
Hi,
I am using the non blocking TWI on the nrf 52840 with the following code:
The xfer is handled like this:
TWI config is
and
The twi_event_handler...
Hi, I have a FEM module connected with spi0 on an nrf5340 running Zigbee. without the FEM module, the range of the device is around 10 meters (specific environment, not free...
Hi,
we would like to provision TLS tags / certificates for cloud authentication over Segger RTT on a custom device. We are using the Golioth cloud with the Golioth Firmware...
Hi,
I am working on optimize the SPI timing for an NFC reader IC which connected to nRF52840, to minimize the read/write time as much as possible.
And I notice that...
Hello,
I am evaluating the Thingy 53 + nRF7002 EB for Wifi and Bluetooth scanning.
But depending on which power source I plug the devkit, the wifi interface doesn't set...
Hello,
I just bought a nRF52 DK board (PCA10040, 3.0.0, 3023.22, 1050315142 ). It has a N5340 MCU near the micro USB port, and on the other end, it has a N52832 MCU. I have...
Hi,
I own an nRF5340 Audio DK, on which I successfully run the example audio application .
Using nRF extension for VSCode, I've created a new application based on the...