Hi,
We are using nrf54l15 soc in our product and using NCS SDK 3.4.0. The LFCLK is set to SYNTH mode where it derives the clock from HFCLK. We have a crystal driving the...
NCS 3.0.1
nrf52840
nrf21540
I have read several tickets regarding antenna diversity and BLE. It does not seem to be supported for BLE. What about Thread?
I have read...
Affected: nRF Connect SDK v3.4.0; the same code is on main as checked on 2026-11-11 ( subsys/net/lib/nrf_cloud/common/src/nrf_cloud_codec_internal.c , subsys/net/lib/nrf_cloud...
We are currently using an NRF54L15 with TF-M on NCS 3.4.2. We have a custom secure partition, and want it to own a persistent P-256 ECDH private key and derived AES-128 key...
When I connect the two-pin battery and short pin1 and pin2 of P1, I am unable to get the battery voltage at J1 AND WHEN I LEAVE THE PINS UNSHORTED FOR P1, THEN I AM NOT GETTING...
I have connected the correct 47K res for VSET1 but I am not getting 1.8V, instead I am getting 2.3V I am getting the correct output for BUCK2 as 3.3V I have checked the resistor...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
We're developing Bluetooth tags that we would like to operate at both 1Mbps and coded (long range). With our initial distance testing on our beacons , we're not seeing much...
Hello,
We are developing using nrf5340 DK and were wondering if the deviceId returned by NRF_FICR->INFO.DEVICEID[0] and NRF_FICR->INFO.DEVICEID[1] are actually printed on...
When I connect on tera term and try sending AT commands, the device doesn't identify them,
My prj.conf file looks like this:
I don't want to use AT_SHELL, so can u please...
Hi,
I trying to build and run the Azure FOTA sample on a custom board with nrf9160 SiP. It builds fine with the nrf9160 DK.
It seems to be a mcuboot problem. I get the...
I am starting with Bluetooth and intend for that to study the nus examples
But can't find them in the sdk folder (2.2.0 or 2.2.99)
the samples in versions <2.0 didn't...
[EDITED after more investigation]
I am using workflow 4, where I have my own application's manifest "west.yml" (See https://developer.nordicsemi.com/nRF_Connect_SDK/doc...
I want to reserve some flash area to store application specific configuration data. This data will not change for the life of the product. I originally had an area set aside...
I have the following characteristic defined:
BT_GATT_CHARACTERISTIC ( BT_UUID_WT_SERIVCE_TX ,
BT_GATT_CHRC_NOTIFY | BT_GATT_CHRC_READ ,
BT_GATT_PERM_READ ,
wt_read_tx_str...
I am creating proof of concept software using a nRF52840 Dev Kit. The code is based on the Nordic UART Service example which uses Zephyr, but has been substantially modified...
Hello,
I am trying to the build the following demo from github on Keil:
https://github.com/NordicPlayground/nrf52-ble-image-transfer-demo
I am using Keil uVision V5...
Hello ! We are planning to use ESB to communicate in-between nRF52 devices in a public environment. NB: our product only embeds the ESB stack - no bluetooth nor BLE tasked...
Hi Nordic team,
We are using nRF9160 DK board.
We want to use the AT command to control the power management of the module (for example: PSM)．
Is there an AT command...
Hi,
I want to filter BLE advertisements on manufacturer ID when scanning with nrf_ble_scan. I cannot change the advertising packet, but only want to filter on packets from...
