We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hello
I actually have hard time moving from NRF51 to NRF52.
While learning new things I got stuck with SPI configuration and I couldn't find any help on the internet...
Hello All,
We are developing app which uses NRF iOS mesh SDK for configuring , provisioning and controlling mesh devices . We have mesh air purifier which are able to configure...
Greetings,
I am looking into power management options for our custom board using the nrf52840 with the nRF Connect SDK.
I wanted to ask for a clarification if possible...
Hello,
Our company developed software for a machine to work. We wanted to use the software on an existing factory board. We wanted to communicate with an app (ble) to the...
I provision a mesh network. The server nodes of network have successfully provision and assigning successfully the publish address. Similarly the client of network also provision...
Hi,
I need to modify the download_client to download the data from our cloud using the http POST method. The way cloud is implemented is that the device needs to specify...
Hi, After successful connection to custom nRF5340 peripheral, among pairing options under nRF Connect For Desktop Bluetooth LE (v4.0.4) I checked this one.
Pasting any...
Hello,
I'm working with nRF52840 for some time, communicating esb on a BL653-DK (Laird), trough nRF52840dongle.
Recently I noticed that during ongoing communication, occasionally...
Hi,
I am going through various sensors on my custom board and integrating them one by one. I've got "i2c0" peripheral setup and can talk with BME680, LIS2DS12 no problem...
Hello, I'd like to use the nRF Connect SDK to add DFU functionality to the nrf52810. Is there any sample code for that? I intend to use the B0 bootloader (the NRF immutable...
Hi !
Does MCUBoot driver can support mx25u12835fzni-10g ( https://octopart.com/mx25u12835fzni-10g-macronix-25459838?r=sp ) without any modifications ?
DK Board have MX25R6435F...
I wanted to check the current consumption of nRF52833 with Online Power Profiler, but there was no selection.
Can I select nRF52840, but can I assume that it is equivalent...
I've been looking into how to add butonless dfu to my application but so far all the examples I've found either require booting into DFU mode and only advertising the SMP...
Hi Nordic Team,
we create a user version of FW of nrf9160 under the path C:\ncs\v2.1.0\nrf\applications\serial_lte_modem
we flash the our new FW(merged.hex) into the nr9160...
Hi,
I'm using the Zephyr sample peripheral_hr mostly as is.
I get the following log messages when I run:
[00:00:17.350,280] <inf> fs_nvs: 2 Sectors of 4096 bytes ...
