We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
I have not been successful to updating the firmware of the Thingy:53 board, and I have tried all methods indicated here: https://developer.nordicsemi.com/nRF_Connect_SDK/doc...
Hello
I am working on an application for the nrf5340 in which I aim to use 2 devices on the QSPI bus. I am on the nrf5340 HW v2.0.0 and NCS v2.1.2.
In looking at the datasheets...
In the nRF910 Hardware Integration document, it says "... it is mandatory to use external pull-down resistors in the size range of 100 kΩ in the COEX interface". In my design...
Hi ,
I have compiled in Heart rat relay into my app; can scan and connect to simulator and garmin HR straps; but fail to connect to polar. My debug log shows...
...
Hi,
I would like to set the publication period sensor model and directly in the code by default (compilation time).
and how can I set by default a publication group address...
Hi We are developing an IoT device that should send its telemetry to an Azure IoT hub. therefore we have choosen the nRF-9160 DK with the azure_iot_hub sample, which works...
Hello
In pm_static.yml I defined a flash partition, intended to save some NV-flags for the application, which should survive OTA/DFU updates.
The project uses BLE for...
python buildprog.py -c both -b debug -d both -p to FALSH the nrf5340 Audio DK (ncs2.2.0, JLink V7.84a ), it reports error.
Based on the error info, searched from the https...
I have a custom board with a BMD-345-A-R module and working with the nrf connect sdk 2.2.0
I have builded and flashed the openthread/cli sample for my nrf52840DK and its...
Hello,
Is it possible to create an overlay file for prj.conf for each build configuration? I see that each build config can optionally have its own separate config file...
I am currently working on establishing thread network using nRF5340DK to send/receive data between thread device(client) and global network(server). I was successful in setting...
We are using W25Q64JV with nrf52840 on our custom board. Here, we are able to Read/Write using QSPI but we are not able to write beyond a certain address. For example, we...
Hi, I am facing a problem with the selection "Enable debug options" when creating a build configuration. I use nRF connect SDK 1.9.1 with VSCode. I create an application from...
Hello, We've been currently working on securely connecting a peripheral with no display and no keyboard, to a central with a display and keyboard. We need to make sure that...
Hi,
I'm trying to get my firmware running on a nRF5340-DK before I have my real hardware. I've connected a MAX86171 via I2C to the DK, the MAX86171 has a nominal operating...
