We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hello,
We have recently decided to transition from nRF5 SDK to nRF Connect SDK to develop a simple application that is able to respond with its FW version when requested...
I'm trying to build some of your samples using nRF Connect/VSCode, but when I try to build a non-secure build for the Thingy91 (thingy91_nrf9160_ns), it changes to secure...
Good day
I an in the process of reducing power consumption with my edited LWM2M sample. I am able to use XRAI commands successfully when doing using a a callback function...
Hi everyone. Currently I'm developing a custom board which contains the nrf52840 module from EBYTE( E73-2G4M08S1C)
My problem is that the module doesn't have a 32.768KHz...
I'm in the process of upgrading a custom 9160 board from Nordic SDK v2.0.2 to v2.1.0. I've adjusted some of my application code and converted the device trees to use the PINCTRL...
Hi,
I am new to zephyr.
I have tested Ibeacon and System off example individually on nrf52840 PDK board.
I am trying to add system off (Deep Sleep) mode in the zephyr...
I have a problem with this library as I have an AT response in char array & I can't parse the data to the list as mentioned in the documentation.
Thanks in advance
Hi everyone,
I have a quick question regarding the dynamics of the t_conv for when having multple channels of the SAADC. In brief, I have 2 channels set up to sample at...
HI All,
I was trying to establish communication between my thread device and remote server using RPi and nRF5340DK. For that I took the echo client sample and modified according...
Hi,
We need to communicate with a legacy patient monitor device. So we need to use this NRF52840 device to send out packets and receive packets as per our legacy device...
Hello Nordic
I am working with nrf52840 and nrf52832 on pcbs, i want to use the nrf21540 with my pcbs to extend the strength of transmission.
I have read this data...
Hi there,
I'm trying to implement "poor man's gang programmer" in the following way -
On the edge of a 16 PCBs panel, there's a 2*10 pins row easily accessed by 2...
Dear All,
In our scneario, we have 10 pcs Jetson Nano DevKit based cameras in each site.
One of devices will be connected to Internet by LTE Module and act as a gateway...
Hi:
I am trying to get continuous notifications using pc-ble-driver with 52840 dongle from a Nordic NUS board. I set the MTU size to 240. After getting 9 notifications...
