We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi team,
Is unique pairing i,e permanent pairing of bluetooth devices possible, which means confidentiality between bluetooth devices and their pairing only with their...
Good morning. I am studying an example with nrf52840 DK. In the ble_app_multilink_central example, I want to try to change the UUID because I want to try to attach BLE from...
Hi, I am making a PCB with nRF52840-QIAA and aQFN73 footprint. Do you have available documentation showing the actual size of the balls (diameter) for this package and maybe...
Hi,
I am using NCS 2.2.0, nRF5240.
Recently, i add NSIB to my project, but MCUboot, application(app core and netcore)can not upgrade.
I read some MCUboot code, and find...
Hi,
i'm wiring a EKMB1303111K to the 52840 DK.
GND to GND
VIN to VDD
OUT TO P.012
I'm setting up the GPIO with
nrf_drv_gpiote_init(); nrf_gpio_cfg_input(12...
Hi - We are entering the Regulatory and Industry certification phase for our product.
We are starting to receive quotes and we have a PTCRB test house asking for the PICS...
Hi, I tried to run peripheral spi / spis examples on Nrf52840 with sdk 17.1.0
However I had problems with receiving data from master.
I expected to get "Nordic" every...
I'm trying to avoid buying a 12.288MHz oscillator if I can make one of the pins on the nRF5340 oscillate at that frequency.
It looks like the ACLK is only available to the...
In our setup the size of the binary for mcuboot is 33996B . Is it possible to reduce the size of the binary somehow ( 1228 bytes would be enough) and make it use only one...
I'm sending data to the serial port in two ways:
First, if I use a terminal emulator and send a character at a time, app_uart_get returns NRF_SUCCESS for each character...
How do we avoid this error when integrating a c++ library into the build?
```c:\ncs\toolchains\v2.2.0-rc1\opt\zephyr-sdk\arm-zephyr-eabi\arm-zephyr-eabi\include\c++\12.1...
We are using MCUBoot with MCUBOOT_SWAP_USING_MOVE enabled.
We ran into the issue, that we could not run the mcuboot upgrade, when the binary is too big (see also ). The...
Hello, I am looking to integrate a c++ library into the nRF5340 Audio DK build. I am trying to ensure the compiler applies all the CMake flags it is using for the c compilation...
Hi,
I've been in the process of upgrading to V2.2.0 of NCS, and now that I have my code working, have been testing the DFU process using the nRF Connect App. This used to...
