We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi Nordic team.
I have a question regarding the nrf connect mobile application.
I am developing a mobile app using react native and ble-plx package for connecting to...
hello, I developed a custom board using nRF52840, and secured_ota_dfu is working well. But at the same time, I want to do DFU using USB. Then, there are two bootloaders. What...
I am using a device that can notify (1 sec for 22times,( 45ms )) and 160 bytes a package,when I use pc_ble_driver_py to collect notify, I only can received 10~11 package for...
Hello everyone, I'm not able to perform the authentication process with statickey and bonding using the pc-ble-driver-py.
My setup is the following:
Central : Devkit...
Hello
Im using nrf52840 in custom board
this is my configation
but i saw schematic DK nrf52, and its don't have some one like this, it's directly whitout external...
Hi,
We are looking for BT module which can be used for Audio streaming. Our device will need to connect to BT earphones for audio streaming. Audio will be read using SPI...
As the title... I have a custom 128bit service. I've added a bunch of characteristics using characteristic_add(), which end up as 128-bit characteristics according to nRF...
Hi Everyone,
I am using NRF52840 in my project and working on sdk 17.0.2. My application includes the following:-
1) Send aquired data from sensors to the desktop via...
Hi,
I am considering CAPVALUE on a module using nRF5340.
When I set the following in direct_test_mode of NCS v2.1.2, I got the following register value. ・CONFIG CONFIG_SOC_HFXO_CAP_INTERNAL...
I am debugging performance on NRF5340 NET CPU using RTIMER to measure execution time and DWT Cycle counters to measure cycles. Both along pretty well, but when I compare executed...
Hi Noridc,
I have a nRF5340DK, it has worked well for some months, and now it grows wrong.
When connect to the PC via USB, the device is not recongized as Jlink or any...
hello nordic!
i had successfully realize the first scenario：using one andriod phone in the Setting（native connect ，not third-party app） to connect to the ble device(nrf52832...
Hi there,
I am developing a board that contains an nRF52832 chipset using the AN043 PCB antenna design by Texas Instruments.
I have aquired a VNA from Megiq, and I am...
Hi, I have a NRF52840 that has pins P1.07 and P1.04 connected to a FTDI cable. The GND is also connected to the FTDI cable. Nothing else is connected and the device powers...
