We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,I am a rookie.
Recently, I want to use nRF52832 BLE dongle as a sniffer and try to capture BLE packets.I can see and analyze BLE packets in wireshark,but my teacher asked...
Hi,
I am using light_switch_client and light_switch_server in nrf5 mesh sdk to send and recieve custom messages which i have added to its default structure.
Iam able to...
Hello,
I ordered and received NRF52840-DK, Dongle and OV2640 SPI Camre module.
Basically, I have a necessary HW items to run BLE Image Transfer demo.
I am not App developer...
I studied the firmware assembly using Zephyr and West. Now I'm trying to include devices working with matter in other. You have examples in the NRF Connect SDK - for example...
I am trying to use an ESP32 board to upload OTA DFU from SD card to NRF52840 board. I am using ZCBOR library to encode and decode requests and responses I am sending over...
I am looking for a module that supports mutiple connections in a broadcasting (one to multiple) fashion; simply put, our device (with a nRF module) will send small amount...
im using SEGGER embedded studio V7.10a . im trying to build the example from nRF5_SDK_15.0.0_a53641a/
im using the free licanse for the nRF52832 on public configuration...
HI,
I have compiled Nordic Light Example for nRF5340-DK and flashed it.
I'm using a border router based on beagle bone and OpenThread 1.3
On nRF5340-DK I have set...
The goal is to have a remote debug session configured and running from vscode with nrf52840 mcu.
I am at the moment configuring a remote debug session on an internal LAN...
Hi,
I want to implement a simple Zigbee cluster that can transfer bytes between zc or zd, like UART TXRX.
I found Messaging Cluster might be the one. After checking these...
I've used ble_app_uart as the template for my app (nRF52DK S112 SDK17.1), then I use nRF Connect on my Android phone to write to it.
Works fine, except if I change the base...
Hi there,
The Mesh DFU on my project is so far working, but as stated on the bootloader read me, the process need to initiated and crontrolled by another extrenal entity...
Hi All!
I am using nrf9160DK , NCS 2.2.0 asset tracker v2 example . I enabled the AGPS in proj.conf file as mentioned below
CONFIG_NRF_CLOUD_MQTT=y CONFIG_NRF_CLOUD_AGPS...
Hello,
I developed a board with E73-2G4M08S1C(nRF52840) as its main MCU. I would like to develop a simple radio project on this board with power supplied from battery instead...
After installing the nRF connect sdk (v2.2.0) via the toolchain manager (v1.2.1) I noticed the installed size of the toolchain was quite big (~ 4.9GB)
Looking into the toolchain...
