Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hi,
I am testing GPIOTE interrupts on 833, and noticed the interrupt is not fired sometimes (randomly) on power up. The input level did change as measured but the interrupt...
In this commit https://github.com/nrfconnect/sdk-zephyr/commit/d4023b3c1b8c32d978299143125ce5543c9bc6bb and this conflicting commit https://github.com/nrfconnect/sdk-zephyr...
Hello,
I am trying to compile the zephyr/samples/subsys/display/lvgl.
I have the lv_conf.h enabled
I'm getting an error "No SOURCES given to Zephyr library: drivers_display...
I'm using Zephyr as packaged in NCS v2.0.2
I have a thread that is "event" driven.
My first implementation used "signals" (k_poll(), k_poll_signal_raise()) to trigger...
Hi, I've noticed much higher than expected power usage and I've narrowed it down to PWM. I need to be able to turn off the PWMs when they're not needed.
I use all 4 PWMs...
Hello Nordic team,
In my application, I was using nrf_nvmc_write_words () to write data to flash. this was working as expected and was able to update value in flash more...
Greetings,
I have made a custom (out-of-tree) devicetree binding file for an spi flash memory device and named it: zephyr,myflashmem.yaml
I have created the folder ...
Hi,
I'm trying to display data from a particulate matter (PM) sensor on my device using nRF Mesh App for Android. The app is on version 3.2.4.
Since there is no entry...
Hello team,
In my previous ticket, https://devzone.nordicsemi.com/f/nordic-q-a/94814/serial-peripheral-interface, I have posted queries related to SPI protocol concerned...
Hi there,
Due to Zephyrs filesystem logging backend being too inefficient for our use-case, we decided to implement our own bare-minimum logger. It is meant to write messages...
Hi there,
in the past year I've been developing a USB bridge. The last major milestone for this bridge was the support for WebUSB. For WebUSB to work on Windows WinUSB also...
Hi,
I would like to operate the board in high volt mode via the J2 input and the SW9 should be in the VDD position. I have set the REGOU0 to 0xFFFFFFFD but when after measuring...
We found that it took a long time for the nrfconnect sdk to power on the device to enter the application. Is there any way to reduce the startup time?
...
Hi,
This might sound like a silly question, but is there a way to use SUPL library with Asset Tracker v2 with LwM2M integration without having to trade off logging ? SUPL...
Hello.
I am building a solution on nRF52820 based on the ble_nus service, starting form the uart example.
The solution I am building is a GAP peripheral and a GATT server...
