The NTN AT command guide documents a "Signal quality check" option for performing a pre-check before attempting to re-attach to the Skylo network:
https://docs.nordicsemi...
Hello,
I am trying to flash and debug a custom board using the Raytac MDBT42Q-512KV2 that uses the nRF52832 module mounted. I tried this using the jlink plus and the nRF52...
I have a similar question to this , however it's for the nRF54 family. Can I route similar the SWD signals out through unused pins/balls on a BGA? In this case, I'd route...
Hi DevZone,
I am currently working on a project that uses MCUboot (DFU over BLE) on the CPUAPP core together with a custom FLPR application.
I successfully got this working...
Hi Nordic,
We are building a custom board using the nRF9151 LACA.
We see a back-powering issue between the GNSS antenna bias rail and VDD_GPIO.
Setup:
VDD_GPIO...
nRF54L15 FOTA Failure:
MCUboot reports magic=bad on Slot 0 and magic=unset on Slot 1 using NSIB + MCUboot + TF-M with Pure DTS Partitioning
Description
I am implementing...
Hello,
We have a project currently using NCS v3.2.3. We delivered the first production series of 50 units already, with the NSIB from this NCS version. We use the NSIB with...
Hi I made a custom board with an nrf52811. I did program an ble-peripheral project. After I connected the LED stops blinking and it's on. But now It don't go back to blinking...
Hello, We are using nRF52840 with SDK 15.3.0, a bootloader and the SoftDevice 6.1.1. An update to the same version of application is allowed in our code. We discovered a really...
Hi,
I am working on zephyr example dns_resolve(zephyr\samples\net\dns_resolve), how to test this example , I have gone through readme file many times still it is not cleared...
Hello.
* nrf52840 sdk17.1.0
We make some BLE device using nrf52840.
we using fstorage for storing about flag information. And, We using PWM for LED indicator.
Our...
Hello Devzone,
I am working with the Nrf52-dk and a thingy52. When flashing, I face difficulty in determining whether the onboard nrf52 is being flashed, or the thingy...
Hello,
I am using an Arduino Nano-ble-33 and I am having issue counting edges. The values seem to be roughly 0.4% higher than they should be. If I put a 1000Hz clock, I...
Hello,
I am migrating to a new custom board where NRF52832 reads ADC ADS7042 and transfers data through the BLE. My previous board works just fine, and in the new design...
Greetings,
Today I updated the BLE app of the nRF Connect application (Win 11) to its latest version.
I clicked it to open after it completed the update.
It prompted...
Hello support team,
I'm building a FTMS application on a nRF52840 Dongle amd am struggling with the characteristic UUID's broadcast for my service.
Firstly, I am using...
The docs r ecommend the nRF5340 DK connected as described with a 10-pin 2x5 socket-socket 1.27 mm IDC ( Serial Wire Debug (SWD)) JTAG cable.
Is it possible to use my nRF9160...
Hi,
Iam getting this error when i declare the following:
uint8_t tx_buffer[0x2000] _attribute_((section(".spim3_tx_buffer")));
When using nRF5 SDK i could able to edit...
Hi all,
We've developed BLE controllers for our new smartphone-based VR product. nRF52810 with S113 softdevice.
Right now the data (inputs + multiple IMU data samples...
Hey Devzone community
I have a super weird I2C problem.
While configuring, everything is fine - however, when I'm trying to use the I2C API read_register and write_register...
