Hello,
I am trying to flash and debug a custom board using the Raytac MDBT42Q-512KV2 that uses the nRF52832 module mounted. I tried this using the jlink plus and the nRF52...
I have a similar question to this , however it's for the nRF54 family. Can I route similar the SWD signals out through unused pins/balls on a BGA? In this case, I'd route...
Hi DevZone,
I am currently working on a project that uses MCUboot (DFU over BLE) on the CPUAPP core together with a custom FLPR application.
I successfully got this working...
Hi Nordic,
We are building a custom board using the nRF9151 LACA.
We see a back-powering issue between the GNSS antenna bias rail and VDD_GPIO.
Setup:
VDD_GPIO...
nRF54L15 FOTA Failure:
MCUboot reports magic=bad on Slot 0 and magic=unset on Slot 1 using NSIB + MCUboot + TF-M with Pure DTS Partitioning
Description
I am implementing...
Hi,
I am experiencing an issue where SPI read operations fail after upgrading from NCS 3.2.4 to NCS 3.4.0.
Hardware:
Custom board based on nRF52840
ADS1294...
Hello,
We have a project currently using NCS v3.2.3. We delivered the first production series of 50 units already, with the NSIB from this NCS version. We use the NSIB with...
Hi
I am looking for an advise about selection of the optimal connection parameters. I am using couple of nrf52832 devices as the nus peripherial. As the central device I...
Hello,
Issue: after successfully compiling, generating bootloader settings, merging and flashing bootloader+settings+sd+app, the device enters DFU mode while i was expecting...
Hi! We are trying to put in the same application for both GNSS( developer.nordicsemi.com/.../README.html) and NBIOT( developer.nordicsemi.com/.../README.html) .
The examples...
Hi，I have a question:
1.I use device_ get_ Binding ("UART_1") When UART1 is opened, ENXIO returns to 134. How do you solve this problem? For others, I used uart0, spi2,...
Hello everyone!
Please tell me if I can connect nRF21540 to a microcontroller using only 4 SPI pins (SCK, MOSI, MISO, CSN) and control it completely? At the same time I...
As the title describes, I am getting that error. I am using nrf sdk 17.1.0 on an nrf52840, developing in SES. I have enabled NRF_CRYPTO_ENABLED, NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED...
Hello,
I am currently using Nordic border router image as suggested by Google open thread group as i am using NRF5 SDK examples (sleepy mqttsn-publish example to be precise...
Hi team,
I am using NRF52833 DK with PCA10100 on it and s140 soft device version..
I added service data in advertising_init() function in ble_app_uart example code ...
Hi,
I have used DFU to update my application and worked normally. Now I need to update the application which has be written in NOR flash.
Firstly, I will write the application...
Hi,
We are building the custom bootloader in Rust,
Therefore want to define the non secure memory region.
Need to know exact steps to define the Non secure memory regions...
hi team,
i am using Microsoft Windows 10 Enterprise OS and Segger 5.40 version IDE.
i am using nrf52840 device in my project along with nrf5_SDK for uart peripheral check...
Hi,
In one of the example( zephyr / net / dns_resolve.h ) In this function description "dns_get_addr_info()" mentioned like below,
@details This function can be used to...
Now I've made a board using 52833 and downloaded the 's140_nrf52_7.0.1_softdevice', 'bootloader', 'settings' into 52833.
I use SD_POWER_DCDC_MODE_SET() to enable DCDC in...
Hi
I implemented in the function call in the SDK bootloader on a nRF52840 the BLE MAC address with the following function call:
The type BLE_GAP_AD_TYPE_LE_BLUETOOTH_DEVICE_ADDRESS...
