Running a test that sends a small ping packet to a server about 1/minute and I'm seeing intermittent board resets. I'm still trying to track down the cause, but in one case...
Hello Nordic support,
We are designing a battery-powered device using the u-blox NORA-B206-00B module, based on the nRF54L15. u-blox support recommended contacting you regarding...
Hi Nordic DevZone,
We are currently looking at how best to handle nRF9151 programming in mass production, and I would like to understand Nordic’s intended approach a bit...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
What functionality has the NFC feature?
Work as Card Reader and/or cardemulation
For Card Reader
Which cards are readable (ISO14443 and or ISO 15693 / NDEF?
For Cardemulation...
I want to measure the current consumption of nRF52832 board with the sensors with the power profiler kit 2. I have added all the functions related to system off mode in the...
Hello everybody, I have an issue related to a peripheral which only lets a connection to be established using the proprietary (brand) mobile application. I try connecting...
Yesterday I want to demonstrate the installed toolchain using the nRF Connect for Desktop.
I got errors and it seems to be required to have internet connection.
Is that...
I try to run https://github.com/NordicSemiconductor/pc-ble-driver/tree/master/examples/nordic_uart_client But the following error occurred.
D:\pc-ble-driver\build\examples...
We do have an eeprom accessed over the SPI, and works well.
Need to add an option to access also the I2C eeprom.
Adding to the project nrf_drv_twi,c, nrfx_twi.c, nrfx_twim...
Hello every one
Pin numbers on DK boards are printed as P0.08 or P1.20 etc. but in nrf_config.h files Nordic assigns numbers to the pins. There are pin numbers from 0 to...
We are developing an application based in nRF5340 using nRF Connect SDK v1.7.0
In this application we have a bootloader for both app and net cores.
Bluetooth is set to...
I am testing UART between PCA10040(nrf52832) and Raspberry Pi 4. I connect TX/RX/GND 3 lines between RPI4 and PCA10040.
On host RPI4 side, my test app send 1 byte to 32...
Hi All,
I just had a quick question about the SDK as it pertains to assigned services. Is the BLE Base UUID defined anywher ein the SDK files? i have looked all over; ble_types...
Segger Studio is capable of reporting Flash usage and Ram usage (heap & stack).
Is there a way to do that without Segger Studio? I'm using gcc, JLink command line tools...
Hello,
I am working on nrf52832 I have set up the SES IDE v 5.5 environment with SDK 17.0.2.
I am getting compilation error "unknown type name 'uint32_t' "
The...
I have a custom model and I successfully configured its publication parameters with bt_mesh_cfg_mod_pub_set_vnd
The model publishes at specified intervals as expected
...