Running a test that sends a small ping packet to a server about 1/minute and I'm seeing intermittent board resets. I'm still trying to track down the cause, but in one case...
Hello Nordic support,
We are designing a battery-powered device using the u-blox NORA-B206-00B module, based on the nRF54L15. u-blox support recommended contacting you regarding...
Hi Nordic DevZone,
We are currently looking at how best to handle nRF9151 programming in mass production, and I would like to understand Nordic’s intended approach a bit...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hi,
I followed this guide to use puncover but failed:
https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/zephyr/develop/optimizations/tools.html
I am using...
The Nordic Thingy:91 comes with Bluetooth, and for now most of my deployment will be in areas where I'll be able to connect to it via BLE. I can receive data from my Nordic...
Hi guys,
So here is our application:
we have an external 1GB NAND flash on the board with a nRF52840 SoC. We save sensor inputs to the 1GB flash and when we connect...
I want to either create or open a MCP2515 CAN based application using https://github.com/zephyrproject-rtos/zephyr/tree/main/boards/shields link.
I am new to this platform...
Hello
We are planning to build a product without physical pins and currently evaluating different recovery options. For that we want to use OTA via BLE/SMP in a dedicated...
Hi,
I'm using SDK17.02 HID example on nRF52810.
When slow advertising have timeout, the current is about 6uA. BTW, I closed sleep_mode_enter() function.
But when I stop...
I have found that NRF SDK proposes mbedtls and cifra backends for AES based security. The question is whether is possible to reuse nRF52 HW AES for CCM, GCM, ECB modes supported...
I have nRF52840 module with not enough IOs than what I need and I am looking if possible to hook both: external flash memory and LCD display on the same QSPI peripheral
...
Hi,
As far as I can see, the only difference between these two SoCs are that the 840 has more RAM and flash memory, and supports QSPI (833 does not). Are there any other...
Hi,
We have nRF52833 based solution wherein we have scanner (central role) and multiple sensors (peripheral role) connect to exchange data.
We have added DFU functionality...
Dear Nordic Support Team,
we are planning to use the nRF9160 DK outside of our development department. E. g. we would like to provide the board, along with a certain user...