Hello Nordic support,
We are designing a battery-powered device using the u-blox NORA-B206-00B module, based on the nRF54L15. u-blox support recommended contacting you regarding...
Hi Nordic DevZone,
We are currently looking at how best to handle nRF9151 programming in mass production, and I would like to understand Nordic’s intended approach a bit...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hello! I am quite new to hardware design with these chips, I have been working with NRF24LUP1 for a while, and have custom bin file for it, not a hex file. and I am unable...
Hi,
I am trying to send the data from SAADC on BLE. I follow the example: https://github.com/NordicPlayground/nRF52-ADC-examples/tree/master/ble_app_uart__saadc_timer_driven__scan_mode...
I use PCA10059 demo board,receive BT data by" nrf connect for desktop",yesterday it is ok,but today when I plug it into my PC,it can't be recognized.and no any indicator,...
My peripheral_demo is already able to work. Now I'm trying to add dfu to it.
I followed the instructions here. (+) Add DFU support to your application - Software - nRF Connect...
I have been able to set up external flash for MCUBoot for FOTA.
But after rebooting, the image is the same than before the image upgrade.
I used a sniffer so i could...
Hi,
I have been looking at the sample https://github.com/Rallare/fw-nrfconnect-nrf/tree/nrf9160_samples/samples/nrf9160/simple_at and see that the socket() function uses...
Hi all,
I'm trying something similar to this:
https://devzone.nordicsemi.com/f/nordic-q-a/21628/how-to-use-nrfjprog-dll
i.e. using the nrfprog.dll to connect with a...
Hi,
How do you create a macro in the nRF Connect Mobile app (Android) that displays RSSI in the log every time I receive a temperature signal.
Thanks very much.
Hi,
I have nrf52840 based BMD340 evolution board. I am able to run beacon transmission example.
ble_app_beacon.
Now I want to receive beacons and see the list of it...
I use nrf_fstorage_write() to write data to fstorage. And then I use nrf_fstorage_read() to read data. But data of fstorage written data and reading back are not the same...
Hi,
I have been stuck on this issue for a long time, I have created a buetooth mesh network using NRF52832 IC, which I have completed perfectly.
But the issue is I...
I have seen webinar on YouTube where NordicSemiconductor demonstrated a peripheral_hr that send simulated heart rate data from nrf52833 to nrf android app. But now I want...
I'm using two nRf52833 DKs as BLE Central and peripheral and I Used "Zephyr/Samples/bluetooth/central uart" and "Z ephyr/Samples/bluetooth/Peripheral uart" to start with....
Hi,
I am testing NRF CTS and ANCS examples using iOS 14.7 (iPhone 6s) and 14.8(iPhone 10) and Zephyr 1.9.1. The peripheral (target) is a custom wearable running on nrf52840...
Hello Group,
I'm trying to send I2C data from nRF52832 using the Nordic development board. I have a problem with TWI when I build/copy the TWI code from the example twi_sensor...