Hi, We had an issue of our custom build boards were the application firmware could be programmed, but the modem could not be programme because of the error "RootKeyDigest...
The "Programmer v4.8.0" from "nRF Connect for Desktop v5.4.0" does not appear to use the Windows system time correctly, and this problem has appeared for us with the new UTC...
I'm working on an open source smart watch project https://github.com/Protocentral/healthypi-move-fw . I'm after serial communication with another device, so I need to re-enable...
HI.
We have experienced an additional power consumption of ~200uA @ 1.8V on our board when booting from PowerOnReset compared to a Warm reset. Searching for the root cause...
Hi, We are in the process of upgrading device firmware (using Nordic nRF9160) from nRF Connect SDK 2.4.2 to nRF Connect SDK 3.4.0 LTS. A number of devices to be upgraded are...
Hi,
Our nRF91 fails to register on LTE-M even though it sees suitable cells and PLMNs. Manual PLMN selection fails as well. The network never sends a reject; the modem seems...
Hi,
1. I removed RTT related codes in the project.
2. Will uncontrollable factors be introduced?
3. Is there any potential risk when the code runs?
Thank you for all...
Hello,
Trying to run the TWI_SCANNER example on a pca10100 hard faults. The .emProject file has been modified per the instructions at https://devzone.nordicsemi.com/f/nordic...
Hi,
I am using nCS to write applications on vscode IDE, that is I am using the "nRF Connect Extension on vscode IDE" I need to unit test the written application code,...
1.I want to know which regions or mobile operators are supported by nrf_cloud's AGPS and PGPS services. Does it support all areas covered by NBIOT and LTE-M?
2.In China...
Dear Srs.,
We have some of our products (sensors and communications elements for smart cities), that are using your nRF9E5 product. Now we have been awarded an important...
Dear Nordic
I have a question to ask your.When I used the NRF52 Series and nRF5 SDK,I made a simple modification tot the radio test program in examples\peripheral\radio_test...
Dear, I created a project in SES. I modified the zypher.dts file to define some pins as below:
1. I added some pins in aliases as shown in fig 1.
2. I added pins with...
Hi,
nRF Connect SDK1.8.0, Windows10 X64.
as follow simple code，it will infinite restart.
but all short change to int or char, it work well.
the same code, run...
Hello
Happy Christmas in advance.
I meet a trouble about using littlefs and mcuboot at nrf52840dk.
ncs1.7.1
project:littlefs
I have changed the nrf52840dk_nrf52840...
Hi all
I'm developing a BLE application using nRF52832 : SDK 17.xx
I need to embed a passkey, and the only app example relevant in this case is ble_app_gls.
using this...
Hello again Nordic World,
I am using a slightly modified version of the ble_central example running on both 10028 and 10040 boards as "test central boards" for communicating...
Hi,
We are developing trainer sensor device and looks very smooth so far. But our questions is some apps change our device name to Bryton Trainer xx in the searching stage...
Hi there,
Having just migrated from an x86 Mac to an M1 Mac, I'm now having difficulty getting the programmer app of nRF Connect for Desktop to detect a device. When I attempt...
