I want to enable in nrf Connect SDK for nrf54L MCU FW image encryption for upgrade. In the project we use NSIB B0 bootloader plus MCUBoot with ability to upgrade MCUBoot and...
I want to use a new source LF clock to raise the precision from +-250ppm to around +-20ppm. I already have an oscillator mounted in my PCB, so I want to use it for BLE. I...
Hi,
I would like to know if its possible to run Azure FOTA functionality w/o using Partition Manager (aka `SB_CONFIG_PARTITION_MANAGER=n`) ?
Trying to build this gets...
Dear Nordic Team
our customer are making the batterie profile by using NPM-FG ， by profile logging , it was all fine by testing under low temperature and room temperature...
Hi，
Hello, I frequently need to perform BLE DTM testing, but there is only one CWM500 instrument available, and I have to queue up and wait for it every time I run tests...
Hello, we want to evaluate the BLE ISP2454-LX chip.
To do this we bought from RUTRONIK FRANCE an ISP2454-LX-EB evaluation board with the ISP2454-LX-TB test board.
SDK...
Hi Nordic team,
I have a question regarding the RF matching networks used in the nRF54LM20A-PAAA reference design and in the nRF7002 Expansion Board II (PCA63571).
For...
Hi
I am using nRF52832 and SDK13 versions.
Can I change the bootloader start address from 0x78000 to 0x77000?
Currently, bootloaders are using 0x78000 to 0x7DFFF area...
Hi all, As written above, as soon as I try to send an array of 8 bytes(8,255,0,1,64,64,0,1) onto the NUS the ble_nus_data_send and the consecutive sd_ble_gatts_hvx() trigger...
Hello,
According to below thread, we could choice 16MHz external crystal with minimal “startup” current consumption:
https://devzone.nordicsemi.com/f/nordic-q-a/1657...
Hello all,
I am trying to compile the Light Switch sample here https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/samples/bluetooth/mesh/light_switch/README...
I have an application and a bootloader, both using the cc310 backend.
In my bootloader code, I find that nrf_crypto_rng_init fails, because CRYS_RndInit returns CRYS_RND_INSTANTIATION_ERROR...
Hello,
I am trying to build the default main.c code for Hello World for nrf5340 using the SEGGER IDE , through "Open nrfConnect SDK Project".
The SEGGER IDE version is...
Dear Team,
please how to shortout this type of error......
Building ‘ble_app_lbs_nus_c_pca10056_s140’ from solution ‘ble_app_lbs_nus_c_pca10056_s140’ in configuration...
Hello everybody,
I am working on a custom board and i´d like to implement libuarte (on a nRF52832) to communicate with another uC on said board. I am using sdk 17.0.2. The...
Hi, I am not sure whether there is I2C pins on nRF52840 Dongle board as based on the Adafruit Feather nRF52840 Express the pin is P0.11 and P0.12 as shown below: SCL 0.11...
Hello,
I recently got my hands on a Nordic Thingy:91. Following every steps of the User Guide with no harm until the nRF Connect for Cloud connection (step 7.4.). The...
Dear nordic team,
I was working on secure dfu bootloader where i added SPIS example with it to communicate it with stm for some data transfer and controlling the switching...
Hi,
I am using NRF Connect SDK 1.7.0 in VS Code. It works great, thanks for the good work! I have a small question. I wish to run a little script to deploy some files after...
Hello,
I am trying to get the RTC2 working in order to maintain time for my application. I intend to use the BLE DFU feature in my application and so I am using the softdevice...
