Hello
I need some advice on FOTA via BLE on the nRF54LM20B. I managed to get FOTA working to upload an updated image via BLE, but after a reboot, the new image doesn't load...
I am using the nRF5340 development board to program the LBS example from the NCS SDK2.7. After system-off, the current is still several tens of microamps, which differs from...
When trying to add the device to the Nordic Cloud Device Management interface, I get the following error.
"There was an error adding your device: No device found for this...
Hi,
I am using the heart rate sample.
I have connected ground to ground, 3.3v to vdd, SDA to pin 26 and SCL to pin 27. I have 4.7k pullup resistors on SDA and SCL. When...
Hi,
I am developing a custom PCB based on the nRF52840 and am currently trying to flash/debug it using an nRF52840-DK (PCA10056) as an external debugger.
connected devices...
So I have two questions. My first is on the impedance matching network on different pcb stackups. So wouldn't I need a different matching network for a different pcb stackup...
We use the NRF Mesh Android Library (and are developing with iOS version as well). An issue that we are running into on a small number of devices is that the library things...
I was using Nordic Connect SDK v1.4.0, but put development on hold for a few weeks waiting for v.1.5.0. In particular I was waiting for openthread to be updated (which requires...
When I look at datasheet and reference designs for the nRF5340, I see a variety of approaches to DC/DC converter and bypass components. Is it a 10 uH inductor, or is it 10...
Hello Nordic!
I want to control the battery level, and set alarms... I know that there is a cluster callled PowerConfig cluster and I have been reading it, but I acan't...
Hello,
Sorry in advance if it sounds simple, i'm a beginner but I read AT command interface — nRF Connect SDK 1.5.99 documentation (nordicsemi.com) except that I can't retrieve...
Hi!
I'm currently working on a project thats based off of the nrf desktop keyboard. I'm using the Taiyo Yuden eysgcnzxx.
I just wanted to inquire the functionality of...
We have a Zigbee device that doesn't seem to use ZCL to transfer data and I have been trying to see if there is a way to get it working with an nrf52840 acting as a coordinator...
Hi, can we connect and enable the BME680 in the asset tracker code for the nRF9160DK?
It is already on the Thingy and I notice there is a switch CONFIG_BME680 in the code...
Tried to connect and Flash the hex file to enable BLE sniffing on the DK. However, the Connect desktop app was not able to detect the Development Kit.
All Steps mentioned...
Hello,
I am working on the Nordic nRF52840 development board to create a thread network and I want to use Raspberry Pi4 as thread board border router. The nordic SDK provide...
Following the insn here: https://devzone.nordicsemi.com/f/nordic-q-a/54591/nrf_serial_event_drv_err-what-is-the-cause
I found that under certain conditions, I get ERRORSRC...
Hi Nordic Community,
I have been experimenting with samples in NCS and making modifications.
Sometimes adding some code causes a hardfault during runtime. I can often...
Hello.
My application is an I2S Master that transmits audio data to an audio codec. I need to setup a transmit buffer using EasyDMA. Is EasyDMA used by default when using...
Hello,
we developed an application with a nRF52840DK as central and a custom board with a nRF52832 chip as peripheral. The peripheral sends data via NUS with a data rate...
Hi,
I'm working on the secure_bootloader example. I am having problems with micro ecc. When I compile the project, it gives an error like this.
I'm trying to follow...
The nRF5340 net-core examples (e.g., radio_test, hci_rpmsg) work fine with the 'west' build system. However, with SES, download fails with the error similar to below although...
