Windows x654 is OS
I have purchased the 2 boards nRF54L15-DK
I have not downloaded the correct nRF Connect for Desktop or the nRF Connect for VS Code
I have an older...
Hi,
I am currently testing the dect_shell example on two nRF9151 DKs and achieved a range of ~500m. I want to transition this setup into a multi-hop mesh network topology...
Hi: The device shows successful reconnection, but the mobile end is not connected.
And the connection information displayed on the device is (public), which is actually...
I am trying to measure the 300mA system current.
I cut off the system lane and connected Vin, Vout.
And when in ampere mode, the system is not turning ON.
(When I replaced...
Hi Nordic,
I have a custom board using a Raytac MDBT53 module with nRF5340. The board is designed for 3.3 V / LDO mode, but during bring-up I likely flashed firmware/configuration...
Hello Nordic support,
I am using two nRF54L15 devices with NCS v3.0.1 and ESB DPL at 1 Mbps. Auto ACK is enabled, the payload is 252 bytes, and the retransmit count is 9...
Hello,
I setup nrfutil to use VALIDATE_ECDSA_P256_SHA256 and have this output from the pkg display output:
|- hash_type: SHA256 |- hash (little-endian): 60de8328530e5882b789259309c47d20dc1a9482f89606ad2cb70d9ad6456b1b...
Hi, Thank you for your attention to this matter.
The questions are as follows:
1. I originally used the following python script to upgrade the modem firmware, can be upgraded...
I'm working on adding encryption to the secure bootloader in SDK v16.0.0. I've based my changes largely on the framework and code provided in this thread . I believe I have...
I have had several problems with signing images, so I'll start with something simple, and I hope you can bear with me as I get to my final goal which is to OTA (which I am...
Hello, I have two nrf52840 dongles with CLI FTD example programmed on both dongles ( https://infocenter.nordicsemi.com/index.jsp?topic=%2Fstruct_sdk%2Fstruct%2Fsdk_thread_zigbee_latest...
Hello,
I am currently working on interfacing an e-paper display with the nRF9160 dk using SPI protocol. After some reading I was able to set up the prj.conf, overlay files...
Hi,
I am trying to use the SPIS 1 on the nrf52840 but when i compile the program i get the following problem:
Rebuilding ‘zephyr/isr_tables.c’ from solution ‘build’ in...
Hello, I designed custom board using nRF52832. BLE Blinky code is working after uploading. I can able to see my ble with NORDIC BLINKY app and I can control LED. But while...
Hi,
I've had my share of problems with upgrading from SDK 1.3.1 to 1.4. Now I noticed that my app crashes randomly when I am downloading FOTA image with download_client...
I know I am going to regret posting this question, but I need to ask it.
I have an application that will be put into the nrf52840 chip. It will not be upgraded over the...
Hi all, I'm having this really strange issue with the wrong hardware+software+soft combos... Last week I merged together a program that incorporates the following: SDK15,...
I am about to start a new project for the nRF52840DK using SES in Ubuntu 18.04. I would like to start with an existing application but I don't want to change the original...
Hi,
I just want to make sure about this post
https://devzone.nordicsemi.com/f/nordic-q-a/42170/is-temp-anomaly-31-applicable-to-nrf52832-qfaa-0b
static __INLINE...
Hello,
I am using the serial output logging (via UART) via the following calls/macros:
NRF_LOG_DEBUG ( " test");
Now I want to get also serial input (data from PC to...
Any idea or example for easiest way to print rotated text (only particular text, not the whole display) and inverse text(only) foreground/background colors?
Thanks
