It would be extremely useful to get the HCI Traces (BLE) of my nRF54L15 boards. Documentations: Embedded HCI Tracing For simplicity's sake, here is my setup: - nRF54L15DK...
Hello there,
I'm designing a set of devices composed of a remote and 2 peripheral. The remote's job is to be connected to the 2 peripherals as a central and occasionnaly...
Hello, I’m testing a PID controller for a quadcopter. When I compile the application with the optimize for speed then flash, I notice that the PID response is slower than...
Hi,
I have a couple of questions regarding reading the nRF5340 Temperature Sensor. This is a follow-up to the following DevZone ticket: https://devzone.nordicsemi.com/f...
Hi.
I wonder if you could help me:
I'm using a thingy91x and would like to work with the npm1300. In the case of this hardware, the PMIC npm1300's i2c bus is connected...
RTT log output issue
Hello, I am using SDK v3.0.2 and toolchain v3.0.2. After building and flashing my firmware, no logs are being output to RTT Viewer. What should I do...
We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
Hi,
I´m using nrf52840 with softdevice S132, SDK version 15.2 as ble central. I´m using the write_cmt_tx_queue by setting ble_gattc_conn_cfg_t::write_cmd_tx_queue_size to...
Hi
We have a budget every month of max bytes we can send (unsure about receive, but prob not included).
We need to be able to ask the modem for the actual NUMBER of...
Hi,
I developed a sensor mesh network using 'nRF5 SDK' and 'nRF5 mesh SDK'; and SEGGER Embedded Studio...At the moment, I can view sensor data using Jlink RTT viewer. However...
Hi
I am developing the mesh network based on the light server example and also integrated the flash manager to save the custom app configuration.
If just running the...
I need to use a burst write i2c function to write the dmp library for the MPU6050 gyroscope.
The current function that I've been using does not work for this case:
And...
Hi
I am using Ubuntu 16.04 and the latest version of nrf Connect for desktop and JLINK. Initially, there were some errors related to the serial port. Once I upgraded JLINK...
Hello!
On the Nordic website there stands that Keil is supported. So I am currently using it throw the Package but i got a problem with the correct partitioning in Keil...
HI ,
I have built a mesh based network based on the light switch sample.
Now I'd like to take it to the next step - I'd like the pass 70 Bytes of data between nodes (...
I am using the nrf51-dk on windows 10 and I tried to apply the latest mbed bootloader. After I do that and restart the chip, the device seems to mount and dismount repeatedly...
hi all
i want to make BLE peripheral app for send data to via UART but i don't know about which sample good for my purpose? so please tell me which sample good for my requested...
Hello
I have a very strange behaviour with debugging the mqtt_simple example for the nRF9160. The example is crashing in debugg configuration. (This happens with Segger...
I am using Nordic SDK 14.2.0 with the pca10040 and I want to integrate the Buttonless DFU functionality into my project (started with the Nordic BLE app template).
I tested...
Hi All
I want to add some custom source files (.c) & header files (.h) to an existing project.
I tried adding it by right clicking "Project app/libapp.a" branch of the...
I'm getting started developing an app for nRF52811. have worked with nRF52832 before. I was wanting to start my development on top of the basic ble app template project, from...
Hi,dear engineers,
I refer to the examples in nRF5_SDK_14.2.0_17b948a\examples\ble_peripheral\ble_app_buttonless_dfu\pca10040\s132. I Port it into my own program. it seem...
